I'm hoping to build a reloading bench this summer and get tooled up. I've never reloaded but I have been saving up brass. What do you think of this book?
http://www.amazon.com/Beginners-Guide-R ... merReviews
Is this a good book on reloading?
-
- Posts: 232
- Joined: Fri Feb 28, 2014 11:31 pm
- Contact:
Re: Is this a good book on reloading?
Looks like it could be worth the asking price. Have not read it but appears to have decent reviews. Would be a good first step to add to the library. Others you might consider in addition......"NRA Reloading Guide"......" The Complete Book of Practical Handloading" ( John Wooters ) .......current reloading manuals from Hornady or Lyman and older editions of manuals from Lyman,Speer,Hornady,etc. that come up on Fleabay often.
".......ain't many troubles that a man cain't fix
With seven hundred dollars and a thirty ought six."
With seven hundred dollars and a thirty ought six."
Re: Is this a good book on reloading?
Have not read that book so can't comment on it. I can recomend the current Lee manual.and since I'm a bullet caster I'll suggest the current Lyman cast bullet manual. The Lee manual has more load data than any book I've seen. I got started handloading over 35 years ago with an RCBS Rockchucker kit. Several of the reloading tool manufacturers sell starter kits and they are a good buy. I won't recomend any specific brand. I have used dies from Lee,RCBS and Redding and all are satisfactory. When I built my first loading bench I did not have a lot of room so my bench was 4 feet wide and 2 feet deep. Thought I'd build a bigger one when I had more room. Got more room now but still use that same bench. Any questions you might have post them here and somebody will answer or pm me.
- Bandersnatch
- Posts: 480
- Joined: Tue Oct 21, 2014 3:48 am
- Location: Lower Alabama
Re: Is this a good book on reloading?
Should do. Pick up a copy of the Hornady manual. It has lots of good stuff in it.
I am the cat who walks by himself. And all places are alike to me.
-
- Posts: 232
- Joined: Fri Feb 28, 2014 11:31 pm
- Contact:
Re: Is this a good book on reloading?
Norm,
If I can get rid of (it'll go to Habitat for Humanity) a large dresser I have from the 1970's, I'll be able to build a sizeable bench.
I've heard good things about the Hornady manual....is the latest edition the best to get?
Will different brand dies work in any press? Ex: will RCBS dies work in a Lee single stage press?
If I can get rid of (it'll go to Habitat for Humanity) a large dresser I have from the 1970's, I'll be able to build a sizeable bench.
I've heard good things about the Hornady manual....is the latest edition the best to get?
Will different brand dies work in any press? Ex: will RCBS dies work in a Lee single stage press?
- Bandersnatch
- Posts: 480
- Joined: Tue Oct 21, 2014 3:48 am
- Location: Lower Alabama
Re: Is this a good book on reloading?
RCBS will work in Lee machines. They were designed for single stage loading and using them in a progressive machine, a Dillon for example, takes a little thought. For instance, I use the seating die to seat only and have a separate crimp die so as to not over stress the brass.
I am the cat who walks by himself. And all places are alike to me.
Re: Is this a good book on reloading?
Almost all dies and presses made today use 7/8 x 14 thread and will interchange. Lyman 310 dies have smaller thread something like 5/8 x 30 . There are bushings available so 310 dies can be used in a press threaded for 7/8 x 14. I do this mostly with the Lyman expanding chamber for flaring case mouths for loading cast bullets.I don't have the latest Hornady manual so can't comment on it.
Re: Is this a good book on reloading?
Almost all dies and presses made today use 7/8 x 14 thread and will interchange. Lyman 310 dies have smaller thread something like 5/8 x 30 . There are bushings available so 310 dies can be used in a press threaded for 7/8 x 14. I do this mostly with the Lyman expanding chamber for flaring case mouths for loading cast bullets.I don't have the latest Hornady manual so can't comment on it.