thegreatmodel8.remingtonsociety.com

1913Model8

Unfortunately not enough people interested to lower the cost down enough. 15 tools was till 200 plus from what I remember here. I was hoping to do more like a run of 35 tools which would help a lot on lowering cost. 100 tools and we would be at the 150ish per tool. I think I posted the cost in anoth...

1913Model8

Hi Everyone, I am thinking about creating a run of new old style ammo boxes. Example here I have Remington Kleanbore 170 soft point next to me. I think it would be cool to put reloaded ammo in these and use them or display them. I also have an old crate of Remington 30-06 Kleanbore but of course no ...

1913Model8

Keep up the great hunting! Bird hunting is my personal fav!

1913Model8

Hibby83 wrote: ↑Wed Aug 30, 2023 5:46 pm Got it the other day. Thanks for getting the design around and shirts made.

Thanks for letting me know! enjoy!

1913Model8

54bullseye wrote: ↑Mon Aug 28, 2023 3:42 pm Got my shirt today. Fits good with very nice graphics !!! Wish I had ordered two !! Thank you !
John Taylor

Glad to hear!! Thanks for ordering! If we ever want more all I gotta do is call them up and say how many.

1913Model8

Fantastic thanks for letting me know!

1913Model8

Fantastic! I am glad you like it!

1913Model8

54bullseye wrote: ↑Thu Aug 10, 2023 2:18 pm I paid using email address. John Taylor

Shirts have shipped usps ground, keep a look out!

1913Model8

Yes they do, just to protect the art work for going forward. I didn’t want it directly on the art as that just doesn’t need to be right on it and clutter it up. For all the hot rod shirt I have done in the past the artist always gets their name and copyright on/next to the art

1913Model8

Here they are guys! the shirts are in and ready for shipping!
A few photos here are the examples you are getting in DTF (direct-to-film)
They probably have a small amount of residue from the art-to-shirt application process.
Shipping out tomorrow for those who have paid.

1913Model8

Just ran some numbers on quotes for is the pilot shafts where aluminum 7075-T6, no common shaft, meaning one part to make a shaft for each cal. so as everyone would get a set (25,30,32,35) the tool comes down to $250. Does this help anyone out with decision making for ordering? This is for the FN to...

1913Model8

HI Everyone, Just was doing some thinking here on a compromise tool design for a barrel service tool. I took what I have for the FN Tool and comped it to making it work with a 3/8 drive ratchet tool. In simple Two parts will be made to make a complete tool. No shaft going into the barrel or pilots, ...

1913Model8

Thanks for the PMs to prompt me to reply - I'm not visiting the site as often lately, too much to do while the weather is nice! While I can appreciate why a quality, custom made tool would be a costly proposition, I think the price is getting to the territory where I may have to bow out - with the ...

1913Model8

What is your reciever serial number just curious?

1913Model8

What a bummer for sure but it doesn't look like a throwaway for sure.
If you had really bad worries I would bring it to the gunsmith and have them check it out.
Maybe Magnaflux it for the crack or something?
Maybe they can weld-fill it and machine it flush again?

1913Model8

Sounds good to me ! Looking forward to it ! John Taylor Thanks! now we have to get all the other guys here to agree to it! -Hibby83 -Tand2cs - 2 tools -Irish_32709 -Bullpupone -Phyrbird -CharlesMRussel -Jack1653 - no longer interested -Canuck -Bandersnatch -Lying Bastard -Chas1949 I think someone e...

1913Model8

Well my first quote I can say is right around $300 but not more than $300, not including shipping. This includes- -handle -body -side screw lock -common shaft -Full set of pilots -2x 2-56 screw (in case you lose one) -2x washers for 2-56 screw (in case you lose one) These will be extremely nicely ma...

1913Model8

Hi Guys, Little teaser here with the exploded view and part numbers listed to it.
The logo I made also that could be laser engraved on the top of the tool. It's about $9 extra per tool main body to have it put on there.
Let me know if you all vote for that being put on there for extra money.

1913Model8

I will put my name in the hat. With that said, is there a minimum number that is required for the run? Is there a number that will drop the unit cost? Awesome thanks for adding your name to the list! Right now I have a guy a guy on the fence as he found a not so good problem with his model 8. Right...

1913Model8

Hibby83 wrote: ↑Fri Aug 11, 2023 10:47 am Funds sent via paypal, my address was included in the notes. Give me a heads up, thanks.

Hi hibby83, I am not seeing your sent payment. maybe it is delayed. Just want to make sure you got the right address down when you sent it?

1913Model8

54bullseye wrote: ↑Thu Aug 10, 2023 2:18 pm I paid using email address. John Taylor

Thanks very much I received payment!

1913Model8

Stupid question probably but why do you need rods for each caliber ? I would think the 25 cal would also work for the 30cal and the 32 would also work for the 35 cal. Or maybe it has to fit the barrel tight ?? Just wondering. John Taylor It does for sure it holds it in place correctly from teeter t...

1913Model8

Hi guys, I present to you the prototype #1 of the FN Tool. Look at attached pictures. Fits like a glove. I checked the 3D print to my CAD on how close the print is in tolerance. Very close to accurate. The print is not strong enough to crack the barrel bushing nut lose as I figured that though. It i...

1913Model8

Hi guys, letting you know I have the shirt order ready at the shop. I am looking for a few more of you to send payments before I pull the trigger. I have 2 of you that has sent payments and thank you very much again. After I tell them to print it should be 5-7 bus days for me to receive them. Then I...

1913Model8

Hardrada55 wrote: ↑Wed Aug 09, 2023 7:01 am I paid using the email address.

I see that and thanks very much!

1913Model8

Thank you very much I recieved payment.
Now I just need your shipping address.

1913Model8

Tharpdesign@gmail.com
2182554228
sorry it isn't working. I checked it again it is @TTharp

1913Model8

Hi Guys, placing the order today or tomorrow for shirts. you can send me the money to @TTharp via PayPal will be the best for me at this point. If you need to use Venmo it is @TJ-Tharp. I think from what I am seeing it's about 10 buck to ship in a bag envelope which is crazy to me. List is who I hav...

1913Model8

Hi Everyone, I am currently working on CAD revision and development for the FN Tool design. For everyone I have listed I need verification again on who wants a tool more importantly how many calibers you each have? I will be making the shaft common in metal and the pilot that is full length in plast...

1913Model8

Bandersnatch wrote: ↑Sat Jul 22, 2023 1:52 pm I would like a 2x, please. Please let me know how to pay.

Thanks! I will put you down on the list. I will probably have everyone just send me Payapl or Venmo, I also have Apple Cash or pay.
I would do a check but are mail here lately isn't the greatest on reliability.

1913Model8

I will put that down on the list. $35 for the 4x. Thanks!

1913Model8

Thanks very much! I have gotten side tracked as well with a few summer things going on but I am also getting back to the FN tool model and cost, my computer has been down for a while holding me back.

1913Model8

Hibby83 wrote: ↑Tue May 30, 2023 4:30 pm1 XL for me

Awesome!

1913Model8

can you please verify the nut and cap are all the same dimensions? Confirmed Barrel nut and bushing are the same diameter (or extremely close) throughout all calibers - 25,30,32,35,300 Also of interest perhaps - the nut and bushing on an FN1900 are also the same diameter HI Canuck, Can you give me ...

1913Model8

Howdy!

1913Model8

I am working on recreating the FN barrel tool, A guy from Canada on here confirmed that his 25- 300 savage all have the same outter dia. of the barrel cap that surrounds the barrel. The outter barrel dia. Itself i would imagine is different.

1913Model8

Sarge756 wrote: ↑Sat May 27, 2023 9:14 am Looks good. I'm in for a 2XL @ $33. Thanks for your efforts on this. Joe

Awesome I will put you down for 2xl, Much appreciated!

1913Model8

Does the print on the shirt have a soft or plastic feel to it? I’m not familiar with DTF, I’m familiar with screen print. The DTF or Direct to Film is a slight shine and smooth feel but after asking they said that this will probably hold up longer than a DTG or Direct to Garment. Attached are image...

1913Model8

Hi Guys, So I have been working on more of the tool design. The rod going into the barrel will probably be a common size with a 3D-printed nylon sleeve for rifling protection. The Nylon sleeve will then be unique in spec to each Cal. So right now with quick uploaded quotes online with a different ma...

1913Model8

Hi Guys, I got my test shirt done of the Model 8. Turned out great, I will post pics tomorrow. I need to know your guys sizes you want. I will be making roughly 12 shirts, I don't have that many committed right now though. Port and Co. shirts high quality. Will be DTF prints on the shirts. Slight sh...

1913Model8

chas1949 wrote: ↑Tue May 09, 2023 2:25 pm Any idea yet as to availability and price

need to know how many calibers you own?

1913Model8

This rifle has been in my family since 1941. It was my Dads rifle and was mine as a boy and now it in in my care. I am looking for a barrel tool so I can service the barrel. https://www.facebook.com/photo.php?fbid=10151421011136709&set=pb.545601708.-2207520000..&type=3 Hi Charles, looking t...

1913Model8

Hi Guys, I will being ordering a 3D print of the tool body first for a test fitment to make sure the model is where it needs to be for machining. Hang tight as this should take long to get.

1913Model8

Guys I also need your shirt size posted, I am getting a quote today just for a short run and then I can always ask for another run of shirts.

1913Model8

chas1949 wrote: ↑Tue May 09, 2023 2:25 pm Any idea yet as to availability and price

Availability will come, price not sure yet haven't had time yet to look into it, Busy with spring chores around the house and cars etc. hang tight will be looking into it soon hopefully this week.

1913Model8

Hardrada55 wrote: ↑Wed Apr 26, 2023 9:09 pm I vote for No. 1 and/or No. 3, with No. 3 a slight favorite. Hats are way cool. I have one of the hats Packmule made years ago now.

IMG_0492.jpg

I will note it down! Thanks for the example of the hat!

1913Model8

I will note it down! Thanks!

1913Model8

I will have to look into the hats. I will note down number 1. thanks!

1913Model8

Thanks! I will note it down.

1913Model8

Hi Everyone! I have been working on a shirt design for the Model 8. I will be doing a Model 81 version too so hang tight on that. I have 3 designs I have narrowed it down to from 10 or so designs I have come up with. I have to get a quote from a shirt place as some places won't print guns. :roll: Ev...

thegreatmodel8.remingtonsociety.com

The only place on the web, dedicated to these great rifles!

Search found 90 matches