thegreatmodel8.remingtonsociety.com

Phyrbird

Category: semi auto rifle
Mfg : Remington
then see all calibers: 25 Rem, 30 Rem, 32 Rem, 300 Sav, 35 Rem. Yeah it takes a little longer, but it gets most of them.
I search on Gr D & got a 7600 & a M11, no excitement but there.
14K for Police model

Phyrbird

I have no PENNY in this, but I know our members have interest. I found lots of goodies, but got no funds. U'ns go for it.... 2 grade Ds 2 (countem) Special police A couple 25Rem (I think) about 30 8 & 81s listed, this is more than I've ever seen, at least 2 with Stith mounts. Good luck hope you ...

Phyrbird

Take care Luke, I could be wrong, there may have been 1907s too. I had 2, One a beater, one a restore. & I don't recall their years of Mfg. Henleys has data on this.

Phyrbird

Welcome
Good luck w/ your newbie

Phyrbird

Luke I note the top toe plate, It's almost as hard to find as the military "S" curve plate. Just don't have one any more. It was on a rough 25Rem. Got traded for a Inglis with a wooden holster. I do believe I absconded 8-) with the holster & assorted goodies. I'm fond of Browning stuff...

Phyrbird

If a 30cal drops thru the bbl it's a 35Rem. REAL small is a 25Rem. Careful the "Remington" calibers except for the 35 in these all had the same parent case: 30 Remington. Get it Right!! Typically if the Rec'r # & the Bbl jacket # match it's original.. Seen a couple like that. Doesn't m...

Phyrbird

Welcome
I too like the 300S, just need a limbsaver to ease my shoulder when I drop the hammer. Nice looker, is that a S&W I see? Got a small group of those too...
Carl

Phyrbird

I'd like it as well, depends on distance & lodging costs. Not a bank...

Phyrbird

Yeah it hit me too, No particular issues aside from eye trash. I just added a ad blocker to Firefox, gone now... But there is an issue on our site.

Phyrbird

Had a Loctite seminar back in the day, blue should be sufficient as long as the parts don't warm too much. Purple would be a possibility, but is really for small parts & low strength. If forced to use red be absolutely sure to heat the threads to the right temp before any attempt to unthread. I ...

Phyrbird

I concur with Luke, even the FBI brazed the shroud to the yoke, I suggest the smith will need to unscrew the shroud & prep the threads B4 brazing. Therefore He/She will need to be a professional with the machine tools to back it up. Not a job for a hand drill or a cheapo drill press.

Phyrbird

Luke Had one of the 25R with the top toe plate, shame it was degraded to "patina", it sold about 10 yr ago. BUT my curved military style is on a GrD with the Lyman 41AT sight.DROOL SLOBBER !! My 32R Not Kreiger has the bottom toe plate I think. The first M81 I got had a FUNKY white plastic...

Phyrbird

Howdy from SOKY

Phyrbird

If there is a bare semi pistol grip M8 recvr out there I could be persuaded to do another restore. :D It would need most of the original blue, if it has 5 holes (below the left rib) for the G&H scope mount OK too, I've 2 ea whining for mounting :? . I've 3 ea of the FBI barrel (original ;) ) ass...

Phyrbird

AND they don't make the thread dies anymore!!

Phyrbird

Cam I try to stay out of online access programming, but. I know Access would probably be better for photo display. However I also know MS products are not as multi platform friendly as others. That said I'm not the best to involve in web page design. I suggest some of the open source "office&qu...

Phyrbird

MAN, wish it was a semi pistol grip, I've a M8 stock crying for a receiver. A nice checkered original.
Got all the parts & a barrel assy too.
Wish me luck.
Carl

Phyrbird

When you get a chance check the production numbers. These are more rare than 95% of the winchesters.
Know what I mean?

Phyrbird

My compliments, I have had one of the M8s in hand but will likely never have one of my own.
They are very special.

Phyrbird

Guys the screw in the "Rem" sight is a fine adjustment, for longer range. BUT, ya gotta lift the leaf a little for it to turn. It's GROOVED on the bottom. (YEah :geek: :ugeek: that's right so it don't turn till the leaf is lifted) Those sights let us fine tune the zero, then use the elevat...

Phyrbird

Yea verily. Been to 2 Cave city shows in the last 3 mo. Have been fortunate to sell or trade items. The return of the funds spent paid for Santa. But my Bro put us to shame. Cobbled a table late on a Saturday, Sold 4 of his & one of his twin's. Blew us all out of the water..... :shock: For me I ...

Phyrbird

With you guys to keep the site clean.
Carl

Phyrbird

Cam
Just a heads up, I've got about a dozen per day emails from the forum that there are new posts in the General section. Plus a half dozen notifications with Cyrillic or Russian characters in the text. We might be targeted by some new hackers. Hope some air head Yahoos don't cause us trouble.
Carl

Phyrbird

Too Cool

Like we don't got enough snow, just not as bad as Iowa

Phyrbird

Luke, Uncle Harry gave Mom a racoon to surprise Dad with a special dinner when I was a kid. Mom was so pleased as Dad had made a living in his early teens trapping & supplying meat for the table... SUURRPrise Harry & his dad had treed an OOLLLDDD boar coon, skinned & dressed it, gave it ...

Phyrbird

WR While I can't be certain about the "cracks" they could be just machine marks. The way to tell would involve a dye penetrate test. IE complete teardown. One thing for sure, the 35 marked extractors are used for the 300S bolts, got 2, However the bolt faces are NOT the same. Yours is defi...

Phyrbird

I must jump in here, as I too am the proud owner of a NOT Krieger. It's a 32R and the button works backward from the the K models. Plus I had a real Krieger mag one time & it did not fit, though it is possible the spares were matched to a rifle. The extra screw on the left is also present. While...

Phyrbird

Note: I am fortunate to have an assortment of the FBI parts. Rear sights & bonafide barrel assemblies. Sorry no wood or receivers. Although as I have already done several restorations; from repairs of non-functional rifles to a complete assembly from an assortment of parts, I would be delighted ...

Phyrbird

They are hard to hit,worse when they are high...

Phyrbird

Think that's bad some of the German claw mounts are brazed to the "ring". If they are N2 filled it has to be after the optic is mounted & fitted to the barrel. Scope is surgically attached.

Phyrbird

I've seen 2-3 of the bbl washers with stamped notches on both sides, they were some made that way. May even have one in a rifle still. It could have been traded though. Even got one with NO notches either side, a Blank??? There is no way of knowing at this date if they were factory or after market. ...

Phyrbird

CCT Got a couple scoped 81s, these ladies eject up, out the top; If your scope is in the way it WILL cause problems. The Stith & Griffin & Howe versions offset the tube enough to the left to clear ejection. The only over the bore mount that functions is one of our members "Scout" m...

Phyrbird

Congrats Luke
Glad for ya, great find....
Carl

Phyrbird

I got one of these in SAE & metric: https://www.amazon.com/Screw-Chekr-Thread-Gauge-Checker/dp/B0006NFUJW/ref=sr_1_20?crid=3T0CIFKSGFTJF&keywords=screw+gauge+plate&qid=1697396144&sprefix=screw+guage+plate%2Caps%2C120&sr=8-20 Works great for testing & is hard enough to act as ...

Phyrbird

Welcome from across the pond, you have good taste in collectables.
Carl

Phyrbird

Is that the original bolt handle??

Phyrbird

Yo Luke
300S will give good results out to 300 if you can hold it, I probably can't anymore. It's a mini 308.

Phyrbird

Luke
I was referring to our Other 30Rem rifle. The sister to the one I have.
Still there?
Carl

Phyrbird

Luke Very pretty, but I see no lyman sights. Did You leave out on purpose or is it gone? I do like the Stith mount for it's takedown compatibility but I don't like all the xtra holes. I have NIB mount but have yet to find a rifle already with a drilled receiver. A shame Remington did not think to dr...

Phyrbird

Phyrbird

I have an assortment of FBI (verified) parts as well for those that have need. BBl assy, takedown screws, sights.

Phyrbird

Just for the record there is a video of Cam getting a stovepipe jam. It just flipped up out of the rifle & landed right back in ejection port.

Not that your problem is similar, just saying....

Phyrbird

SCORE

Phyrbird

Interesting stock(s), I note no checkering. Have you looked in the bottom tang groove of the the buttstock? It may have a Ser# there, & may be the same as the receiver's. I can't tell from the photos much about the condition of the wood, Could you add some PICs to elaborate, I'd be interested on...

Phyrbird

Good for U Luke.

Phyrbird

See This

viewtopic.php?f=20&t=4089&p=22611&hilit ... 21e#p22611

Phyrbird

Boy is Luke right about the screw

Give you 3 guesses how much luck we have finding a tap to chase threads

Phyrbird

Our recent discussions of split case necks has spread. There's good & bad news. This may be off topic for here. Couple years ago I got 3 bx of Hornady 300BO ammo. Things went well at range for a while, but soon I noticed many splits in the case shoulder/necks. This could be dangerous besides the...

Phyrbird

Just a heads up; decades ago I made a leaf spring from a hacksaw blade. Had to shape the contour, thin the leaf, bend the V with the right radius, & create the curl for the pin that worked the extractor. All for a 5mm rimfire rifle I had no way of getting ammo for. The heat treat was the hardest...

Phyrbird

Checking: I'll get back 2U

thegreatmodel8.remingtonsociety.com

The only place on the web, dedicated to these great rifles!

Search found 1050 matches