thegreatmodel8.remingtonsociety.com

Any chance one of you gents has the tang screw bushing dimensions? I have one in my original stock but need one for a replacement stock and the OG stock isn't in such bad shape that it should have the bushing driven out of it potentially causing irreparable damage. As with most other parts, it's unobtainium at the moment, so I'll likely have to fabricate one out of a roller-bearing bushing. Just need the OD, ID, and OAL. Thanks!

Well, for anyone wondering in the future, I figured it out. 9mm OD, 7mm ID (meaning 9mm bushing with a 1mm wall thickness) Seems to possibly be aluminum or very thin steel. The best guess is between 10 and 15mm long. Couldn't get my calipers close enough to that part of the stock to get a true reading.