Page 1 of 1
OEM Magazine fit
Posted: Mon Nov 02, 2020 6:01 pm
by grendel_45
I have a 1910 Model 8 in .35 Rem...the magazine type is 'single leaf/lip';
can someone tell me if i Could use any model 8 mag type in this rifle ?
ie, two leaf ... no leaf ??
PM:
rwhuff@garlic.com
Re: OEM Magazine fit
Posted: Fri Jan 01, 2021 5:37 pm
by danny58
Just found your post.. comparing my model 8 single spring to model 81 double spring I would say they will not interchange..81 has a cut in the trigger group plate in both sides similar to the one on the left side of the model 8 to accommodate the thickness of the spring. the barrel lock mechanism inside the rifle has a cut for fitting the spring as well.
Re: OEM Magazine fit
Posted: Mon Jan 31, 2022 5:55 pm
by Mercomet
I saw one on ebay for 349.00
Re: OEM Magazine fit
Posted: Tue Feb 01, 2022 4:11 am
by Hibby83
349 ehhh
A seller with prices like that gets a hard pass me.
-back on topic.
I don't see why you couldn't use any of the 3 variations, given you modify the trigger guard to accept left/right side springs.
I assume the original poster is long gone.
Re: OEM Magazine fit
Posted: Tue Feb 01, 2022 8:30 pm
by Phyrbird
Or just get a trigger guard cut for the double springs....