Back from the dead, I am!

Talk about things other than the Model 8's and 81's
Post Reply
User avatar
Adam Lee
Posts: 638
Joined: Wed Dec 12, 2012 4:17 am
Location: Alexandria, VA

Back from the dead, I am!

Post by Adam Lee » Sun Apr 14, 2019 7:02 am

:mrgreen:

Sorry guys and gals for the goofy title, but I couldn't figure out what to put in there. I'm not a lurker, I'm not a random gun guy, but I have certainly been off the res for a few years!
Maybe it's guilt, that I can't keep up with the interwebs fast enough, so I just give up and don't bother. I find myself way too easily distracted on the internet with all the bright shiny attractions.... :roll:

Big news: I actually have a valid reason to some extent, in that for more than 4 months I've been recovering from a second major surgery and on disability leave from my job. Now both shoulders have been repaired within 6 months! Fortunately (or not) I am returning to my 3rd grade classroom April 22nd. Hope they remember who I am!
But that news is only half the story. My wife also had a completely unrelated and very serious surgery of her own, which put her out of work for about 4 months, during the same time frame! Yeah, and I just turned 55 so we both are the same age now.

This is alot of info, I know - but I wanted to get this typed up before I gave up on the internet again.....I actually have a very good line of Model 8/81 Krieger-related questions for y'all to ask about, which I will do later in the appropriate area. Right now, my dogs are begging for their overdue walk - and they don't give up bugging me about it!

Hope all are well in this slice of vintage Americana these days.

Adam
04132018vldmusculoskeletalrotatorcuff.jpg
04132018vldmusculoskeletalrotatorcuff.jpg (124.96 KiB) Viewed 123 times
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.

User avatar
Hardrada55
Posts: 227
Joined: Thu Feb 05, 2009 1:40 pm
Location: Southwest Oklahoma
Contact:

Re: Back from the dead, I am!

Post by Hardrada55 » Sun Apr 14, 2019 7:40 am

Glad you're back from across the river! I'm sure your charges will be excited to get you back. This corner the American experiment seems to be doing better than most. W
...the right of citizens to bear arms is just one more guarantee against arbitrary government, one more safeguard against the tyranny which now appears remote in America..."
- Hubert H. Humphrey, "Gun" magazine, Feb. '60

User avatar
81police
Posts: 2230
Joined: Thu Feb 05, 2009 12:12 pm
Location: TEXAS

Re: Back from the dead, I am!

Post by 81police » Sun Apr 14, 2019 7:42 am

Dude!!! You're back!!! We missed ya.

Hope those shoulders heal up soon, they may need a little "Model 8 recoil therapy" before the years out
Cam Woodall
Site Co-Administrator

canuck
Posts: 71
Joined: Thu Feb 05, 2009 6:42 pm
Location: Alberta, Canada

Re: Back from the dead, I am!

Post by canuck » Sun Apr 14, 2019 10:04 am

What were your shoulder issues Adam?
Got me supraspinatus tears in both shoulders myself - 70% in left, 50% right.
Decided to live with it rather than surgery but not sure it was the right choice.

User avatar
Sarge756
Posts: 752
Joined: Sat Jan 01, 2011 10:17 am
Location: N.Florida on the coast

Re: Back from the dead, I am!

Post by Sarge756 » Sun Apr 14, 2019 4:06 pm

Good to hear from you. In the middle of a restoration of a 16 Ga. 'Ranger' (Stevens 520) and know you like them. Will post photos when completed. You are learning that getting old is not for wimps. :D :D :D

Joe
".......ain't many troubles that a man cain't fix
With seven hundred dollars and a thirty ought six."

User avatar
jack1653
Posts: 906
Joined: Sun Sep 13, 2009 7:52 pm

Re: Back from the dead, I am!

Post by jack1653 » Sun Apr 14, 2019 4:32 pm

Glad to see you back on line. That shoulder surgery is no fun. The rehab is what takes forever. When I had my repair, the old pain was gone but the physical therapy brought on new pains. It took me almost all year to get back to normal. I will be looking forward to seeing your posts again.

Regards,

jack1653

User avatar
Phyrbird
Posts: 874
Joined: Mon Jan 07, 2013 10:53 pm

Re: Back from the dead, I am!

Post by Phyrbird » Sun Apr 14, 2019 8:24 pm

Welcome Back, Welcome Back, U knowfrom Kotter. :lol:
I know about the therapy dragging on, from the back surgery couple years ago...
Stay with the stretching & strength building!! It does help, maybe just not soon enough t suit us...
Carl
Phyrbird
SOKY

ranman
Posts: 129
Joined: Mon Jan 23, 2012 5:59 pm
Location: Ontario

Re: Back from the dead, I am!

Post by ranman » Mon Apr 15, 2019 6:27 am

Welcome back :D I bet all students miss you.

User avatar
Adam Lee
Posts: 638
Joined: Wed Dec 12, 2012 4:17 am
Location: Alexandria, VA

Re: Back from the dead, I am!

Post by Adam Lee » Mon Apr 15, 2019 7:58 am

Big #1 THANK YOU to all!

Ironically, I am now just heading out to take my wife to the hospital for another procedure. It's just routine, but another chapter of her spinal tumor saga....will check in with y'all later. Busy guy these days!

Take care
Adam
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.

User avatar
Roger
Posts: 644
Joined: Tue Jan 17, 2012 6:41 pm
Location: Iowa

Re: Back from the dead, I am!

Post by Roger » Wed Apr 17, 2019 4:08 am

Welcome back,old buddy!
Roger
Roger
raw4555@gmail.com

User avatar
Adam Lee
Posts: 638
Joined: Wed Dec 12, 2012 4:17 am
Location: Alexandria, VA

Re: Back from the dead, I am!

Post by Adam Lee » Wed Apr 17, 2019 4:20 am

Roger wrote:
Wed Apr 17, 2019 4:08 am
Welcome back,old buddy!
Roger
Thank you very much for the welcome, Roger! I do appreciate hearing back from an Iowan - my Mom's side of the family all came from Charles City originally, FWIW.

Adam
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.

User avatar
Adam Lee
Posts: 638
Joined: Wed Dec 12, 2012 4:17 am
Location: Alexandria, VA

Re: Back from the dead, I am!

Post by Adam Lee » Wed Apr 17, 2019 5:02 am

canuck wrote:
Sun Apr 14, 2019 10:04 am
What were your shoulder issues Adam?
Got me supraspinatus tears in both shoulders myself - 70% in left, 50% right.
Decided to live with it rather than surgery but not sure it was the right choice.
Well, Canuck, you asked - here is the damage data! MRI immediately following my accidental fall with the 4 items that were torn and reattached in bold print. Copied from my saved files. I am not concerned about piracy of any of this! :lol: :ugeek: :shock:
First off, my left shoulder injury last May. Ended up having the surgery for THIS shoulder late June. Little did I know I was due for the same event for my dominant side shoulder in December!!! :evil: :twisted: :shock:

FINDINGS:
Rotator cuff: Full-thickness, full width tear of the supraspinatus
tendon
is present with differential retraction to the acromioclavicular
joint and glenoid rim. There is a full-thickness, full width or near
full width tear of the infraspinatus tendon
with differential retraction
to the acromioclavicular joint and glenoid rim. Teres minor tendon is
intact. There is a low-grade partial insertional tear of the
subscapularis tendon
with mild medial subluxation of the long head of
biceps tendon
. There is mildly reduced muscle bulk without
evidence of fatty infiltration.
Labrum: The labrum has a diffusely small appearance with blunted
morphology in keeping with degeneration. A degenerative superior labral
tear cannot be excluded.
Biceps Tendon: The intra-articular segment is somewhat attenuated and a
partial tear
cannot be excluded. The extra articular segment is intact.
Bone/cartilage: No acute fracture is present. There is mild cartilage
thinning along the superior aspect of the humeral head.
Ligaments/capsule: Inferior glenohumeral ligament and axillary pouch
intact.
AC joint: Moderate acromioclavicular arthropathy. There is a prominent
inferior osteophyte and a lateral downward sloping acromion with
subacromial spur which narrows the supraspinatus outlet.
Misc: Moderate glenohumeral effusion communicating with moderate volume
subacromial/subdeltoid and subcoracoid bursal fluid accumulation.

Nice, huh? And this came about during a once-in-a-lifetime event, running canine agility trials with my awesome buddy Wolfgang. I was pre-running an advanced course with him, my first practice of the evening, and it was MY mistake that caused me to take a big bad smack into concrete floor when I stumbled running BACKWARDS avoiding a barrier!
OK, the second (yes, 2nd!) traumatic shoulder injury was even DUMBER.
October 31. Halloween. Just got full recovery on that injury, right? 3-1/2 months after my surgery, what happens? Almost too embarrassed to say. I moved too quickly and tripped down 3 steps, tried catching myself with one outstretched arm (here it comes, dominant right arm - get ready for it) and snapped it back the wrong direction falling down. Can you say, ouch?

Yes, thank goodness I had already experienced traumatic shoulder injury in my recent past so I knew what that snapping sensation combined with extreme pain was exactly all about. There was an immediate urge to make an inappropriate outburst, which I promptly made as required.

MRI data for this arm: Less stuff messed up, however - ironically - much more difficult recovery. My doctor explained that no two rotator cuff post-op experiences are the same, regardless of tearing involved.

CONCLUSION:
1. There is a 1 cm wide U-shaped tear of the middle fibers of the
supraspinatus tendon at the tendon insertion.

2. There is mild to moderate atrophy supraspinatus muscle.
3. There is subacromial spurring. There is moderate increased fluid within
the subacromial - subdeltoid bursa. There is mild to moderate
acromioclavicular arthropathy and hypertrophy.

Only after opening things up, so to speak (mostly laproscopic surgery except for the biceps tenodesis, which provided a nice 2" scar) would my super doctor find out the true extent of damage. In my case, I had 3 full-width/complete tears in my first injury, the supraspinatus; infraspinatus, subscapularis tendons with my biceps long head tendon nearly through, so he cut that clean and reattached it which is what you call "biceps tenodesis" and is truly a joy! 4 reattached parts in that shoulder.

My right arm "only" had the supraspinatus half-torn across, regardless of what the MRI interpreter said, so it was repaired as if it were a full tear. At the same time, there was some sort of cleanout procedure done in there. Want pictures? of the MRI screen shots? I have those. Well, no I won't share them because they look like prenatal sonograms!!!

Hope everyone's shoulders are feeling as well as possible, and don't fall if you can avoid it! Hope you guys had fun reading this tome, I was sort of chuckling as I wrote it all out. Maybe it made me feel better about things - I'm still not 100% and as some of you guys clearly know, it takes a good year for these to settle down, even with routine PT.

Oh, did I mention that I had a pre-existing rod in my humerus in my right arm to make things more interesting for everyone? Since I had a nearly foot-long titanium rod in there from ANOTHER accidental fall 20 years ago (much more dramatic injury) my MRI procedure had to be slow as molasses, on reduced power, because of all that metal. I was in total agony trying to stay still in that freaking MRI tube for an hour man! Was worse than the accident itself!!!!

Take care of yourselves, y'all!!!!

Adam
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.

User avatar
Adam Lee
Posts: 638
Joined: Wed Dec 12, 2012 4:17 am
Location: Alexandria, VA

Re: Back from the dead, I am!

Post by Adam Lee » Wed Apr 17, 2019 5:15 am

81police wrote:
Sun Apr 14, 2019 7:42 am
Dude!!! You're back!!! We missed ya.

Hope those shoulders heal up soon, they may need a little "Model 8 recoil therapy" before the years out
Cam, you read my mind! I've been aching ( :lol: ) to hit the range with one of my .300 Savage Model 81's dude! That will truly make for a memorable, painful experience.
Funny thing is, using my old Israeli/Korean tactical vest with heavy rubber shoulder rifle rests on both sides, recoil isn't even very noticeable.
However I'm going to be shooting my .357/.38 Rossi 92 carbine first thing as I can, I've been getting into reloading for that and my Taurus 85 snubbie & Ruger Security Six (.357) but that's another post.
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.

User avatar
Adam Lee
Posts: 638
Joined: Wed Dec 12, 2012 4:17 am
Location: Alexandria, VA

Re: Back from the dead, I am!

Post by Adam Lee » Wed Apr 17, 2019 5:19 am

Sarge756 wrote:
Sun Apr 14, 2019 4:06 pm
Good to hear from you. In the middle of a restoration of a 16 Ga. 'Ranger' (Stevens 520) and know you like them. Will post photos when completed. You are learning that getting old is not for wimps. :D :D :D

Joe
Thanks for checking in, Joe! Not only is getting old serious work, but I didn't even do anything old folks do in order to damage myself! No classic slips on the ice, tripping on the sidewalk curb, falling in the bathtub....jeez I really am a wimp! :mrgreen: :lol:

By all means, post pics of your 520 if you are ever able. I admit to having traded mine off for other guns which I have a tendency to do..... :roll:
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.

User avatar
Adam Lee
Posts: 638
Joined: Wed Dec 12, 2012 4:17 am
Location: Alexandria, VA

Re: Back from the dead, I am!

Post by Adam Lee » Wed Apr 17, 2019 5:29 am

jack1653 wrote:
Sun Apr 14, 2019 4:32 pm
Glad to see you back on line. That shoulder surgery is no fun. The rehab is what takes forever. When I had my repair, the old pain was gone but the physical therapy brought on new pains. It took me almost all year to get back to normal. I will be looking forward to seeing your posts again.

Regards,

jack1653
Thanks Jack - you are spot-on with PT pain, my man! Who knew that would play out like that? I thought they were supposed to make you feel BETTER?

Jack - hey, you with the many Kriegers! You may be able to help me out with something I've been planning during my long recovery (as I was going loco from boredom). I want to make my own Krieger-style modified mags for my rifle, which came to me missing its mag. Now that I have a few spare standard 81/8 mags, I'd like to get some good clear photos of magazine housings in order to approximate the rivet slots and cuts to make, as well as the area to be ground down on the front face of the mag body. I have the tools and technology, but no examples to compare with. Would you be willing to snap pics of a Krieger mag or two to share with the community? I'd be interested in close-up pics of full images only, from all sides/top and bottom. What I mean is shots that include the entire mag in the photo from each of the 6 sides. Even better would be if photos could be made on grid paper or with a ruler line adjacent. I hope this makes sense - and if it's a bother, no problem! I was going to make a general post about this on the forum, but now that I've got your attention here.... :mrgreen: :ugeek:
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.

User avatar
Adam Lee
Posts: 638
Joined: Wed Dec 12, 2012 4:17 am
Location: Alexandria, VA

Re: Back from the dead, I am!

Post by Adam Lee » Wed Apr 17, 2019 5:31 am

Phyrbird wrote:
Sun Apr 14, 2019 8:24 pm
Welcome Back, Welcome Back, U knowfrom Kotter. :lol:
I know about the therapy dragging on, from the back surgery couple years ago...
Stay with the stretching & strength building!! It does help, maybe just not soon enough t suit us...
Carl
Hey Carl! Thanks for the Welcome Back Kotter flashback....definitely on my mind! Hope your back is doing well as it can. My wife just had major back surgery in November, a spinal tumor was removed, she's doing well and back at her school teaching music once again!

Adam
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.

User avatar
jack1653
Posts: 906
Joined: Sun Sep 13, 2009 7:52 pm

Re: Back from the dead, I am!

Post by jack1653 » Wed Apr 17, 2019 12:55 pm

Hey Adam,

I will be happy to send some pictures of the Krieger magazine. Give me a few days to get things together. I will try and get them before I leave for Cape Cod next week. If I don’t, I will get them when I return in May.

Regards,

Jack

User avatar
Phyrbird
Posts: 874
Joined: Mon Jan 07, 2013 10:53 pm

Re: Back from the dead, I am!

Post by Phyrbird » Wed Apr 17, 2019 1:08 pm

Adam,
Glad to hear the post-op therapy is helping your both, Keep on keeping on.
I too am interested in the Kreiger mods.
As I have the "Not" Kreiger & 3 early mags that don't use the side springs I'd like to mod a couple to make Xtra magazines for mine. It is different from the classic Kreiger design so they won't help with the classics. One of the mags in the bin has the front completely ground smooth with the round front. I hope I can restore it to useful purpose by fitting it for my rifle. Otherwise it's scrap till I can figure out the drill for making deep mags from 2 for a 8-10 rd fixed mag. Perhaps I'll get-er-done. :D
Jack, eat some lobster for me, I loved the fresh seafood at Calabash in NC decades ago, wish I could go back sometime....
Phyrbird
SOKY

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests