barrel head

Information on Malfunctions and Care of your Model 8 & 81
Post Reply
uhjohnson
Posts: 139
Joined: Wed Aug 25, 2010 3:53 pm

barrel head

Post by uhjohnson » Sat Dec 01, 2018 4:49 pm

I just received a .35 rem barrel and it does not have a head. I have another barrel assembly with a poor bore, can I take the head off this one and put it on the newly acquired barrel, lining up the index marks and check head space. do I need any special tools
[b]Member of Berwyn Rod and Gun Club since 1983, it is an outdoor range located in Bowie Maryland, if interested in joining call 301-261-7515 or 301-464-9830[/b]

You don't pay too much, you pay too soon

uhjohnson
Posts: 139
Joined: Wed Aug 25, 2010 3:53 pm

Re: barrel head

Post by uhjohnson » Tue Dec 04, 2018 6:10 pm

a friend was telling me what I am calling the head is a barrel extension. in the parts list only the barrel is numbered(29) however it is two pieces because both pieces have marks that align like a barrel and a receiver on a lot of rifles. has anyone ever taken one apart
[b]Member of Berwyn Rod and Gun Club since 1983, it is an outdoor range located in Bowie Maryland, if interested in joining call 301-261-7515 or 301-464-9830[/b]

You don't pay too much, you pay too soon

LyingBastard
Posts: 24
Joined: Sat Jul 14, 2018 6:51 am

Re: barrel head

Post by LyingBastard » Wed Dec 05, 2018 5:34 am

IMHO you might want to consider verifying the headspacing. I do not know if all barrels and barrel extensions were so perfectly made they were interchangeable with each other. I do know in an AR while the barrel + barrel extension *assembly* is usually headspaced against a standard bolt at any barrel shop so this assembly tends to be drop-in, the barrel still may need some fitting onto the barrel extension to get proper headspacing.

But, this is my opinion. I think we should wait for those more experienced with these rifles to chime in.

kenhwind
Posts: 164
Joined: Tue Jun 23, 2009 6:50 am

Re: barrel head

Post by kenhwind » Thu Dec 06, 2018 2:12 pm

The barrel extension is pinned to the barrel.
I bought a .30 Remington barrel on eBay and the barrel nut wouldn't go on, and as I messed around with it the barrel turned. Anyway I ended up with it as the seller was " well you didn't ask blah, blah..." so I took the high road and kept it.

I did manage to drill the pin out but I could not unscrew the barrel extension from the barrel with out ruining some threads. There was a bulge in the end of the barrel and I'm assuming that in order to disassemble the pin sheared off and galled the threads.

I'm sure someone of this forum knows how two separated the two parts
KEN

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest