FS: Rear Picatinny Red Dot Mount.

Items for sale or trade
Post Reply
Fred
Posts: 125
Joined: Wed Feb 26, 2014 11:10 pm

FS: Rear Picatinny Red Dot Mount.

Post by Fred » Thu Oct 17, 2019 5:26 pm

So I made a couple of these picatinny bases for our Model 8 or 81 autoloading rifles. It should be a reversible modification primarily for the addition of a red-dot or reflex sight. You should be able to use your factory nut-plate and rear sight screws to install it.

I'm asking $40 shipped (lower 48). If you think that's unreasonable, feel free to make an offer instead.

I prefer USPS money orders but if you're in a hurry I can do paypal if you pick up the fees.
Pic_Base_2.JPG
Pic_Base_2.JPG (261.43 KiB) Viewed 2952 times
Pic_Base_1.JPG
Pic_Base_1.JPG (192.22 KiB) Viewed 2952 times
Pic_Base_3.JPG
Pic_Base_3.JPG (179.59 KiB) Viewed 2952 times

*IMPORTANT*
I've been informed that the rear sight mount screws are not all the same. If your screw heads are NOT smaller than ~.245" OD I need to know to make the mount fit as intended!

More details:

These are 5 slots long but I can make them a little longer if you need. It's just that there's two little factory screws 5/8" apart holding everything on so I don't recommend going overboard. These bases are 6061 aluminum and partially anodized except where I machined them.

For me, using a 3-MOA Burris Fastfire III my sight picture is just were I need it for shooting off-hand on my M81. It should probably be lower for shooting prone. I could make the bases lower, but then you get into issues with the ~.270" long factory screws sticking up into the slots or the screws hitting the barrel inside the jacket. If the screws sticking up some into the slots is not an issue then I can make the bases shorter. I'm willing to work with you.

The bases' inside radius is a little smaller than .500" so its outside edges will ride the 1" diameter barrel jacket. While I don't think it's necessary, you can use some sand paper and a dowel (or a deep socket) to get the fit a little tighter or you can use a little bedding compound to fill the ~.007" gap. I do recommend a little blue loctite on the screws though.
Last edited by Fred on Sat Mar 21, 2020 2:23 pm, edited 2 times in total.

User avatar
81police
Posts: 2352
Joined: Thu Feb 05, 2009 12:12 pm
Location: TEXAS

Re: FS: Rear Picatinny Red Dot Mount.

Post by 81police » Fri Oct 18, 2019 6:27 am

That looks so awesome!
Cam Woodall
Site Co-Administrator

User avatar
Phyrbird
Posts: 943
Joined: Mon Jan 07, 2013 10:53 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by Phyrbird » Fri Oct 18, 2019 5:32 pm

Fred, I'm impressed. Give me a week or so, think I'm gonna get a couple, please.
Carl
Phyrbird
SOKY

Richard
Posts: 1
Joined: Sat Dec 21, 2019 10:11 am

Re: FS: Rear Picatinny Red Dot Mount.

Post by Richard » Mon Dec 30, 2019 9:57 am

I just got a model 8 a few months ago and I am wondering if this is something that you are still making? I have bad eyesight so using iron sights can be very difficult for me.

Fred
Posts: 125
Joined: Wed Feb 26, 2014 11:10 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by Fred » Thu Jan 02, 2020 8:09 pm

Sorry for the delay in reply, I've been traveling for the Christmas/New Year's holiday.

Yes, I have a few ready-made. I can ship Jan 6 when I get home.

jim18611865
Posts: 92
Joined: Thu May 15, 2014 9:16 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by jim18611865 » Wed Apr 29, 2020 5:46 am

Fred,

Check your PMs.
I would like one if you have any left.

Jim

Fred
Posts: 125
Joined: Wed Feb 26, 2014 11:10 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by Fred » Wed Apr 29, 2020 7:49 pm

PM replied to.

jim18611865
Posts: 92
Joined: Thu May 15, 2014 9:16 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by jim18611865 » Fri Jun 19, 2020 5:20 am

Fred,

Would you be willing to make a longer one for mounting a scout type scope?

I didn't get a red dot for mine yet. Those Burris Fastfire III's seem to be out of stock everywhere. My son and I took the 81 out yesterday.
My son put his first three in the bullseye (3" x 2") at 50 yds with the peep type sights. I was lucky to get 1 out of 10 in the red. That front sight is just a blur.

Jim

Fred
Posts: 125
Joined: Wed Feb 26, 2014 11:10 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by Fred » Sat Jun 20, 2020 5:35 am

Yes, I can make that. But I don't have any personal experience with scout scopes and would need some rough dimensions for overall length, and where you'd want the rail in relation to the barrel yoke/jacket head (or other reference point). Expected height above boreline would be a good reference too.

jim18611865
Posts: 92
Joined: Thu May 15, 2014 9:16 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by jim18611865 » Sat Jun 20, 2020 3:55 pm

Excellent. I will work up some numbers next week.
I managed to find a Burris Fast Fire III. I will try that, but I don't think it will be much better.

Thanks
Jim

jim18611865
Posts: 92
Joined: Thu May 15, 2014 9:16 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by jim18611865 » Tue Jun 23, 2020 5:34 am

I ordered an out of production Weaver 4X scout scope and some rings. It may be a while before they arrive though.

Jim

Fred
Posts: 125
Joined: Wed Feb 26, 2014 11:10 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by Fred » Tue Jun 23, 2020 12:11 pm

No worries, I have time and material on hand.

jim18611865
Posts: 92
Joined: Thu May 15, 2014 9:16 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by jim18611865 » Tue Jun 23, 2020 4:02 pm

I have a feeling when you do this and I post pictures, everyone will want one.

Jim

User avatar
Bandersnatch
Posts: 407
Joined: Tue Oct 21, 2014 3:48 am
Location: Lower Alabama

Re: FS: Rear Picatinny Red Dot Mount.

Post by Bandersnatch » Thu Jun 25, 2020 7:11 pm

Just my two cents, but I think it should be a bit longer, out beyond the hand guard, with a band of some sort around the barrel jacket. This way not too much weight is put on the two sight screws and one could mount a scout scope.
I am the cat who walks by himself. And all places are alike to me.

adktim
Posts: 1
Joined: Wed Jan 25, 2017 6:39 am

Re: FS: Rear Picatinny Red Dot Mount.

Post by adktim » Tue Jun 30, 2020 4:32 pm

Fred,
I sent you an PM to purchase a mount if there are still available.

Fred
Posts: 125
Joined: Wed Feb 26, 2014 11:10 pm

Re: FS: Rear Picatinny Red Dot Mount.

Post by Fred » Tue Jun 30, 2020 6:59 pm

Email sent.

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests