WTT Parts and more

[Phyrbird]

Forum members,
I've some items you might want or need. (PICs at the bottom post)
The list:

In the Bin For Sale or Trade: (Trade usually better for both)
Update 5/4/20
A couple extractors 1 25-30-32 Rem, 1 35R or 300Sav
a couple bolt carrier links for M8/81s,
a 300 Sav Bbl, + a Bbl sleeve + a few parts for said sleeve. No buffer spring. (this is kinda rough finish, best for a project rifle)
An aftermarket forearm, walnut, it's only roughed out, Bbl channel is not completed.
1ea G&H base to fit our Ladies, 1 ea G&H base for unknown
Assortment of screws for the G&H scope mounts, tested to fit
Base mount screws or taper pins (yeah that's right taper) (1 sets)
2 ea G&H bases for Garand, Gone
some 1911 odds and ends parts

Ya'll get first Dibbs

[Simmer down]

I'm interested in the 30 Rem brass. How much and where do I send the money?

[Phyrbird]

Thanks SimmerD (Don) very timely responses, glad I could help...

Carl

[hacker51]

I live in Kentucky, where do live at in Kentucky?

[Phyrbird]

South central Kentucky, see email above to open communications....
You understand a little caution, as a collector I try to vet those getting address.

[Phyrbird]

Update:
FBI takedown bolt & lever, the one with the shoulder for the lock washer WTS or WTT

Some 300Sav barrel Assy parts; I don't need 3 barrels. I do need springs and barrel washer. The sleeve (w/ bushing & front sight) is rather pitted at the muzzle; could be a good candidate for a carbine conversion. WTS or WTT

Looking for 300Sav bolt carrier & bolt complete w/ all parts; got the link, unless you just don't wanna remove it.
Looking for a 35 Rem barrel (prefer M8 if possible) in reasonable shape, threads good, no major flaws in rifling/chamber or barrel block. Probably should have the matching barrel nut with it.
Still need a M8 forearm screw, it's OK if the loop is not perfect. For a restore project.
Could use some rear sight blanks for use with the peep sights. no preference manufacturer.

[Sebastian21]

Have a 35 Rem barrel. Barrel is frosted but has strong rifling. I think it will shoot good. No barrel nut. 150.00 shipped with a three day inspection return less shipping both ways.

[Phyrbird]

Sebastian,
Please send me an email, carlsandage@yahoo.com .
We can discuss, could you be interested in any of the trading material listed?
You can check with other trades we have managed; I have a fair satisfaction rate.

Yours
Carl

[Phyrbird]

PICs of FBI takedown lever, note the step on the head. Included "C" washer, sorry no lockwasher, it didn't come with one.

IMG_20170423_161518.jpg (397.82 KiB) Viewed 33839 times

IMG_20170423_161509.jpg (414.31 KiB) Viewed 33839 times

[Phyrbird]

PICS of Lyman 41AT FBI sight. This one Sold. Note finish is about gone & gap around the flip aperture. Notice it has all the parts, even the little elevation arrow. Did not get the mount screws with, sorry.

IMG_20170423_163409.jpg (229.64 KiB) Viewed 33839 times

IMG_20170423_163249.jpg (263.27 KiB) Viewed 33839 times

IMG_20170423_163225.jpg (278.21 KiB) Viewed 33839 times

[Phyrbird]

Update:
Found 32 Rem RCBS dies, vintage in great shape. Available. SOLD
Finally went back to the reloading supplier, found 30 Rem Graf new unprimed brass.
Got a few bags, maybe can trade some for stuff. Still got 2 bags SOLD
Am working on Fleabay seller account, will probably start moving any stuff the forum members don't need. Speak up
Ebay active; you know my moniker.

[Phyrbird]

Bump cause my edit didn't show as a new post....

[Phyrbird]

Updated first post, See anything you like
See top of the list...

[Phyrbird]

Bump cause my edit didn't show as a new post...

[Roger]

Hey Carl,
I was wondering if you sold either of your Lyman 41 sights.My email is in the address box below.
Thanks for your time,
Roger

[Phyrbird]

Roger,
Email 2 U Thanks

[Phyrbird]

Bump cause my edit didn't show as a new post...
PS I still need some rear barrel sight blanks for my Ladies....

[Phyrbird]

Updated.
I still have the FBI takedown lever when someone needs.

[Huser91]

Carl ,

In your first post I believe it said you had a 35 Rem. Barrel nut washer ? Might you still have it ? I'm searching high and low

[Phyrbird]

Huser,
I'm in process of cool weather catchup from hot season, will check soon. Know I've got some washers, just need to verify if they fit the 35 bbl. (these also should fit the 300Sav bbl) If you please it could be after T-day, OK?
Carl

[Phyrbird]

Want to sell: Update 9/21
Starting at top left;

• Griffin & Howe base for M8-81 or A5 style shotguns.One left

• Lyman 41AT receiver sight Sold one last one still for sale

• Extractor for 25-30-32 Remington calibers

• Bolt link pin should fit all

• Bolt lock rocker should fit all

• Bottom: Williams scope mount for M8-81 & A5 Shotguns w/ one set of rings (both available) should fit all, 4 screws in row

Sold

• Next @ top: Griffin & Howe mount kit bolts & taper pins

Can spare a couple

• Top right: Griffin & Howe mount for unknown

Sold

• Next down: M8 only Butt plate w/ toe & original screws

Sold

• Hook style sling eyes for buttstock; original

• FBI style takedown lever

I'm in process of 2 restores & am moving some parts for funds to support the restore of our Ladies. If you have need of any of these connect with me email: carlsandage@yahoo.com

IMG_20200504_161413.jpg (608.9 KiB) Viewed 24347 times

Another view to help w/ details.

Sell parts for Forum.jpg (296.14 KiB) Viewed 24347 times

[Phyrbird]

OK, add to the list:
One FBI barrel assembly, finish about 80%, clean inside, #301

pix288948003.jpg (209.82 KiB) Viewed 20567 times

Ebay s-l1600.jpg (361.21 KiB) Viewed 20567 times

[Hibby83]

Hello Phyrbird.

is this still available?
___Bottom: Williams scope mount for M8-81 & A5 Shotguns w/ one set of rings (both available) should fit all, 4 screws in row

My buddy's father has an 81 that is drilled for a williams scope mount but he doesn't have the mount.

[Phyrbird]

Luke,
Sorry, it Fleabayed away. And the Williams site no longer lists them. they did a year ago, Shame

[MrEShopper]

Griffin & Howe base for M8? Do you still have the base? I would like to see a pic showing the mounting holes. I have a mount with rings and have been debating whether to use it or sell/trade it.

[MrEShopper]

Found a pic on one of your previous posts. That's a lot of holes. My 8 isn't a rare one, but that's a lot of holes. Hmm.

[Grid]

Happy New Year!!
Hi do you still have the barrel lock and barrel lock spring that is in the picture above? The barrel lock spring is broken in my model 8 and I’m searching for one. Thanks for your help Reed

[Phyrbird]

Checking: I'll get back 2U

[Grid]

That would be great if you have it, the local gunsmith can’t seem to make one. Let me know if you have it so I can call off the gunsmith. Thanks

[Phyrbird]

Just a heads up; decades ago I made a leaf spring from a hacksaw blade. Had to shape the contour, thin the leaf, bend the V with the right radius, & create the curl for the pin that worked the extractor. All for a 5mm rimfire rifle I had no way of getting ammo for. The heat treat was the hardest, took 3 tries, finally heated it to cherry, quench in 30 weight oil, then carefully heated the whole to a light blue, quench in H2O. The hardest was to get the blue not too dark, & not too light. The drop block German silver plated rimfire sold for $800 , a nice gain but I lost @ $2000 in my labor if it counted.....
BTW still ain't found it, KNOW I got one, more later...

[chas1949]

If you are careful with a bench grinder or dremal the flat springs for barrel lock and mag indicator can be made from the attached. Need to be careful not to get too hot while shapping as to not remove temper.

Rim lock springs

F7A6BAA9-6E20-4599-8564-3BC8E8BC76FF.png (617.55 KiB) Viewed 9490 times