Ask about your Model 8 & 81
-
cantgrowup
- Posts: 36
- Joined: Tue Apr 23, 2019 9:27 am
Post
by cantgrowup » Thu May 23, 2019 11:13 am
Well... I just picked up my sixth "greatmodel8".... an 81 in .30 Rem made in May 1949. I already reload for .32 Rem, .35 Rem, and .300 Sav, but my initial searching for info on .30 Rem reloading is not very promising. First of all... my Hornady 10th Reloading manual doesn't cover it!
I have just purchased a set of RCBS dies (RCBS29201) and #19 shellholder, and some brass from Grafs, along with some Hornady 30c (.308) 150gr RN bullets (Hornady item #3035). Does anyone have .30 Rem reload data for that bullet?
-
Phyrbird
- Posts: 911
- Joined: Mon Jan 07, 2013 10:53 pm
Post
by Phyrbird » Thu May 23, 2019 1:35 pm
A start:
http://thegreatmodel8.remingtonsociety. ... 084071c9f5
http://thegreatmodel8.remingtonsociety. ... 084071c9f5
From Stevespages:
150 Grain Bullet--IMR-4320 From 33.0 grains to 36.0 grains
Remington 9-1/2 Primer
IMR-4895 From 32.5 grains to 35.5 grains
Remington 9-1/2 Primer
================================================
170 Grain Bullet
IMR-3031 From 27.0 grains to 30.0 grains
Remington 9-1/2 Primer
IMR-4895 From 30.0 grains to 33.0 grains
Remington 9-1/2 Primer
W-748 From 27.0 grains to 30.0 grains
Remington 9-1/2 Primer
W-760 From 32.0 grains to 35.0 grains
Remington 9-1/2 Primer
Phyrbird
SOKY
-
Sarge756
- Posts: 763
- Joined: Sat Jan 01, 2011 10:17 am
- Location: N.Florida on the coast
Post
by Sarge756 » Sat May 25, 2019 9:19 am
Phyrbird has given you a bunch of options. Remembering that 3 of the (New) chamberings for the 8 - 25,30 and 32 were essentially made to directly compete with existent offerings from Winchester- 25-35,30-30, and 32 win spl reloading our obsolete cartridges doesn`t have to require a lot of searching. Loading data for the venerable 30-30 Win is still posted in nearly every modern reloading manual and the 30 Rem is nearly identical sans a rim. So too with our other two obsolete chamberings. Good Shooting !!
Joe
".......ain't many troubles that a man cain't fix
With seven hundred dollars and a thirty ought six."
-
kenhwind
- Posts: 219
- Joined: Tue Jun 23, 2009 6:50 am
Post
by kenhwind » Sun May 26, 2019 6:23 am
Some reloading manuals state in the cartridge information that the 30-30 data is okay for the .30 Remington.
I bought an older Lyman manual #45 to get some data on the .38 Super and in the back there is a section with data for the .30 & .32 Rem.
KEN
-
Bandersnatch
- Posts: 387
- Joined: Tue Oct 21, 2014 3:48 am
- Location: Lower Alabama
Post
by Bandersnatch » Sun May 26, 2019 8:09 am
6th edition Lyman manual has 30 rem data.
I am the cat who walks by himself. And all places are alike to me.
Who is online
Users browsing this forum: No registered users and 1 guest