light primer strike
-
- Posts: 12
- Joined: Sun Feb 25, 2018 2:13 pm
light primer strike
Model 8 issue. There appears to be very little spring pressure when the trigger is pulled. I have never fire the rifle as it was a recent purchase. The result is a very light primer strike that is not enough to set the primer off. I was wondering if I could get some advise before I pull the rifle apart. Thanks
Re: light primer strike
Make sure front screw on bottom tang is tight, this secures the main spring (hammer) and trigger spring. If loose the hammer will not have enough energy when striking firing pin.
Also does firing pin move freely in the bolt carrier and is not broken?
Also does firing pin move freely in the bolt carrier and is not broken?
-
- Posts: 12
- Joined: Sun Feb 25, 2018 2:13 pm
Re: light primer strike
Thanks for the reply chas1949. I took the rifle apart Friday night. I was able to determine the main main spring tension was light coupled with a lot of internal grime. The rifle now functions as intended. You nailed it chas1949.