new reloading project
- Bandersnatch
- Posts: 480
- Joined: Tue Oct 21, 2014 3:48 am
- Location: Lower Alabama
new reloading project
Now that I have a stash of nifty .30 Remington En route, I begin yet another episode of reloading a weird or obsolete caliber. I make it a matter of policy to never take up more than one new caliber at a time. Thank heavens there aren't too many different ones for the Model 8.
Now, to find some dies...
Now, to find some dies...
I am the cat who walks by himself. And all places are alike to me.
-
- Posts: 101
- Joined: Thu May 15, 2014 9:16 pm
Re: new reloading project
Are you willing to share where the stash is coming from?
How many did you get?
Jim
How many did you get?
Jim
- Bandersnatch
- Posts: 480
- Joined: Tue Oct 21, 2014 3:48 am
- Location: Lower Alabama
Re: new reloading project
Gunbroker.
Total of 90 from two different sources. A little spendy, but, yanno, reloading.
Total of 90 from two different sources. A little spendy, but, yanno, reloading.
I am the cat who walks by himself. And all places are alike to me.
-
- Posts: 101
- Joined: Thu May 15, 2014 9:16 pm
Re: new reloading project
I only have a .32 Remington, and fortunately it came with 90 rounds of ammo, and 10 empties.
15% have been cracking though.
.32 Remington ammo is getting absurd as well so I have decided Santa is getting me a lathe for Christmas to make my own brass from 30-30.
Annealing is in my immediate future as well.
Jim
15% have been cracking though.
.32 Remington ammo is getting absurd as well so I have decided Santa is getting me a lathe for Christmas to make my own brass from 30-30.
Annealing is in my immediate future as well.
Jim
- Bandersnatch
- Posts: 480
- Joined: Tue Oct 21, 2014 3:48 am
- Location: Lower Alabama
Re: new reloading project
.30 is also getting harder to find so I think these cases are getting annealed about every other firing so maybe they'll last longer.
I am the cat who walks by himself. And all places are alike to me.
Re: new reloading project
Not to hijack a thread too badly - LOL - but I will soon 'nuff be joining you guys on the Remington orphaned calibers team! I'd been looking for a good bit for a .30 Rem rifle either in a Model 8, model 14, or even (holding my breath) a Model 30 bolt action.jim18611865 wrote:I only have a .32 Remington, and fortunately it came with 90 rounds of ammo, and 10 empties.
15% have been cracking though.
.32 Remington ammo is getting absurd as well so I have decided Santa is getting me a lathe for Christmas to make my own brass from 30-30.
Annealing is in my immediate future as well.
Jim
What came up for me was a .32 Rem in a mid-20's Model 14 pump rifle. Going thru the purchase/shipping process as we speak.
I'll be paying close attention to all of you'se guys efforts in reloading .25/.30/.32 Rem in the future!
(Also be collecting as much .30-30 brass I can stand to carry!)
take care Adam
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.
- Bandersnatch
- Posts: 480
- Joined: Tue Oct 21, 2014 3:48 am
- Location: Lower Alabama
Re: new reloading project
Adam Lee wrote:Not to hijack a thread too badly - LOL - but I will soon 'nuff be joining you guys on the Remington orphaned calibers team! I'd been looking for a good bit for a .30 Rem rifle either in a Model 8, model 14, or even (holding my breath) a Model 30 bolt action.jim18611865 wrote:I only have a .32 Remington, and fortunately it came with 90 rounds of ammo, and 10 empties.
15% have been cracking though.
.32 Remington ammo is getting absurd as well so I have decided Santa is getting me a lathe for Christmas to make my own brass from 30-30.
Annealing is in my immediate future as well.
Jim
What came up for me was a .32 Rem in a mid-20's Model 14 pump rifle. Going thru the purchase/shipping process as we speak.
I'll be paying close attention to all of you'se guys efforts in reloading .25/.30/.32 Rem in the future!
(Also be collecting as much .30-30 brass I can stand to carry!)
take care Adam
Wear it out, Mang! I'm all for discussing (and cussing) these odd, but wonderful old calibers. Before anyone buys a lathe I *think* I may have found a supplier for .30 and .32 and I have found that Midway has dies in their "obscure rifle" section.
I am the cat who walks by himself. And all places are alike to me.
-
- Posts: 101
- Joined: Thu May 15, 2014 9:16 pm
Re: new reloading project
If the price is right, let us know.Wear it out, Mang! I'm all for discussing (and cussing) these odd, but wonderful old calibers. Before anyone buys a lathe I *think* I may have found a supplier for .30 and .32 and I have found that Midway has dies in their "obscure rifle" section.
I am accumulating things now so in the future I am not beholden to the retail community (or anyone but me), during times of difficulty, for my shooting needs.
Jim
- Bandersnatch
- Posts: 480
- Joined: Tue Oct 21, 2014 3:48 am
- Location: Lower Alabama
Re: new reloading project
These folks have .30 and .32 brass in stock. Also, loaded ammo, but it's a little spendy.
http://www.lohmanarms.com/default.asp
http://www.lohmanarms.com/default.asp
I am the cat who walks by himself. And all places are alike to me.
Re: new reloading project
".......ain't many troubles that a man cain't fix
With seven hundred dollars and a thirty ought six."
With seven hundred dollars and a thirty ought six."
Re: new reloading project
I remember that thread, Joe!! I think I was even involved! LOL
PS....now, I got a .32 Rem Model 14, and I committed myself to the Orphaned Remington Rimless Club!
Pics and a new thread (oops!) to follow, once the brown truck of happiness appears.
Adam
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.
- Bandersnatch
- Posts: 480
- Joined: Tue Oct 21, 2014 3:48 am
- Location: Lower Alabama
Re: new reloading project
Given that that previous thread is 8 months old it seems things have changed somewhat. I have 100 .30 Rem cases in bound from Lohman's and they list both .30 and .32 in stock. $66 for the hundred.
I'm glad I got the cases from GB, but I'm also glad to see another source which is, currently at least, in stock.
I'm glad I got the cases from GB, but I'm also glad to see another source which is, currently at least, in stock.
I am the cat who walks by himself. And all places are alike to me.
-
- Posts: 101
- Joined: Thu May 15, 2014 9:16 pm
Re: new reloading project
I did the same thing with Buffalo Arms several months ago. I am still waiting.
If they do show up, let us know.
Jim
If they do show up, let us know.
Jim