25 Remington from 30-30 Winchester

Posts about the Model 8
Post Reply
uhjohnson
Posts: 156
Joined: Wed Aug 25, 2010 3:53 pm

25 Remington from 30-30 Winchester

Post by uhjohnson » Tue Jan 19, 2016 1:07 pm

I just recently purchased 100 cases of 25 Remington converted from 30 30 Winchester through a process of hydroforming. I paid $1 per case, the necks/shoulders were annealed, the rims turn down and a cut put at the base for the ejector, I have placed 5 rounds in my model 8 and each ejected by hand, I have not loaded any. Has anyone bought from grumpa and shot any, he also does 30 and 32 Remington. Sorry about the pictures, I used my cell phone and then had to crop them to reduce file size
Attachments
20160119_133328-1.jpg
20160119_133328-1.jpg (450.04 KiB) Viewed 2296 times
20160119_132859-1.jpg
20160119_132859-1.jpg (537.1 KiB) Viewed 2296 times
[b]Member of Berwyn Rod and Gun Club since 1983, it is an outdoor range located in Bowie Maryland, if interested in joining call 301-261-7515 or 301-464-9830[/b]

You don't pay too much, you pay too soon

User avatar
Sarge756
Posts: 762
Joined: Sat Jan 01, 2011 10:17 am
Location: N.Florida on the coast

Re: 25 Remington from 30-30 Winchester

Post by Sarge756 » Tue Jan 19, 2016 5:21 pm

I`ve not used any of the 25 because I don`t own an 8 in that caliber YET .However I have loaded and shot the 35Rem that he makes from military 308. No problems with it and expect to reload them several more times. Good to go on the brass he sent me.
Joe
".......ain't many troubles that a man cain't fix
With seven hundred dollars and a thirty ought six."

model63
Posts: 9
Joined: Sun Nov 06, 2011 8:13 am
Location: NE Wisconsin

Re: 25 Remington from 30-30 Winchester

Post by model63 » Tue Jan 19, 2016 8:22 pm

I have loaded both 30 and 32 Remington brass from grumpa for my model 8's with great success. I spent more time on the 32 Remington and worked up an accurate load that functioned perfectly and even managed to harvest two whitetails with it this fall. I have not worked up the 25 remington loads yet, but expect the same great results. If it can save you some trial and error, I had no luck in the 32 or 35 loads using cast lead bullets. The ogive was wrong in both cases and jammed up into the rifling. Hornady and Speer bullets worked perfectly.

GRUMPA
Posts: 24
Joined: Fri Apr 04, 2014 5:42 am

Re: 25 Remington from 30-30 Winchester

Post by GRUMPA » Wed Jan 20, 2016 7:50 am

Not only do those 25Rem get Hydroformed, but so do the other 2 Rem cases I do. Here's a link to a thread I made on most of the process. Notice I said most....on the 25Rem I reduce the neck diameter first before Hydroforming, which is a must do.

http://castboolits.gunloads.com/showthr ... -the-25Rem

Anyone that's used those never had a problem with them. There's some fed back from folks on a thread I have just for the Rem cases I do.

http://castboolits.gunloads.com/showthr ... 0Rem-32Rem

Not everyone that gets things from me actually takes the time to write in open forum, most do it from PM's and that's it.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests