Page 1 of 1
my new 8
Posted: Sun Mar 08, 2015 11:41 am
by uhjohnson
http://www.gunbroker.com/Auction/ViewIt ... =470996193
Did i pay too much and what does anyone see wrong with it other than the split in the forearm
Thanks
Re: my new 8
Posted: Sun Mar 08, 2015 3:34 pm
by Hardrada55
I was skeptical at first glance, but the more I looked at the pictures, the more I believe that the metal on your gun is all original finish. At least the pictures look right to me. I don't see any glaring "errors". I appears to be the right color. Wow, 1917! My only concern is the color of the wood. Is it really as blond as it looks in the pictures? Or does the lighting have something to do with it? Anyway, I've never seen wood as light as that on a Model 8 before. May just be the photos.
Did you pay too much? Down at the pawn shop the other day I saw a Model 8 down on the bottom row, back in the corner. I asked to see it and the guy pulled it out. Someone had figured out how to put a Model 81's flat-side forearm on it, it had been badly reblued at some time in the past and there were extra holes in the left side of the receiver. $850.
Re: my new 8
Posted: Tue Mar 10, 2015 5:15 am
by Hairtrigger
I was thinking the same about the wood.....
Looks like a very well preserved rifle!
Enjoy the 32!!!
Re: my new 8
Posted: Tue Mar 10, 2015 9:49 am
by In The Ten Ring
Congrats man. I saw that auction too. When you get the rifle you can tell us first-hand what you think of the stock.
Re: my new 8
Posted: Tue Mar 10, 2015 5:53 pm
by uhjohnson
Have the ears been removed or did remington stop putting them on rifles by this year
Re: my new 8
Posted: Sat Mar 14, 2015 8:34 pm
by S and S HUNTCLUB
Hello sir, I just replied to your email question. I think you have purchased a unique piece of Remington history. The steel shotgun style butt plate is a rarity with any Model 8. I also feel that the omission of the cheeks during production of late 1916 through 1918 Model 8's was a common practice on the "free option" pistol grip stocks. This combination of the pistol grip stock, the steel shotgun butt plate and the 32 REM caliber is a rarity! The unique Blonde walnut is nice to see as well. Just like anything blonde in color, it'll be easier to find in the dark. 
Enjoy Life, Bob @ S and S HUNTCLUB
Re: my new 8
Posted: Sun Mar 15, 2015 7:43 pm
by Phyrbird
UHJ,
A very clean rifle, my compliments.
They are right the steel buttplate is rare, almost as rare as the "S" curve plate.
The crack in the forearm can be repaired. I've used epoxy with good results in the past. One thing the wood in the crack should be as clean as you can get it. I've used rubbing alcohol to help remove the gun oils from these areas. Be careful, too long a soak with alcohol can blonde out the stain too. A hard part is making the wood cauls for clamping to close the crack. they need to fit
Good with a little gap to squeeze with. Warning
Get no epoxy in the cauls, they don't come loose. Don't glue on the barrel jacket.
Also pay attention to the fit of the wood after glue-up. (on the barrel jacket). If it's too tight it could be the reason it cracked in the first place.