35 Rem barrel nut washer.
35 Rem barrel nut washer.
I am in need of a barrel nut washer for a Model 81 35 Remington. Any leads to find one would be great. Thanks.
Re: 35 Rem barrel nut washer.
Now that I understand the futility of searching for one to buy, Does anybody have one that can be measured for me?
- motorcarman
- Posts: 7
- Joined: Mon Nov 13, 2017 8:14 pm
Re: 35 Rem barrel nut washer.
I have a barrel nut washer if it is the one that is serrated. I bought it from NUMRICH years ago as a 30-30 Rem replacement for my Remington Autoloading Repeating Rifle. (pre model 8) The one in the barrel shroud/jacket was cracked/broken and the one I got from Numrich was the same ID as the broken one. (TOO LARGE, Wrong Part)
I found all the broken parts in the shroud and determined that the one I bought was the same one that was broken. The barrel just rattled around in the new washer so I got on eBay and found the correct .25,30,32 Rem washer.
I would guess that the one I originally bought from NUMRICH is for the larger diameter .35 Barrel although it was clearly sold as the .25,.30,.32 part.
I can measure the ID, OD and thickness to give you some info.
Let me know if you are interested as I have no use for it.
send a Private Message or email.. rancher_dude@yahoo.com
I can put it in the mail if you buy-the-ride.
bob gauff, Decatur, TX.
I found all the broken parts in the shroud and determined that the one I bought was the same one that was broken. The barrel just rattled around in the new washer so I got on eBay and found the correct .25,30,32 Rem washer.
I would guess that the one I originally bought from NUMRICH is for the larger diameter .35 Barrel although it was clearly sold as the .25,.30,.32 part.
I can measure the ID, OD and thickness to give you some info.
Let me know if you are interested as I have no use for it.
send a Private Message or email.. rancher_dude@yahoo.com
I can put it in the mail if you buy-the-ride.
bob gauff, Decatur, TX.
bob in rural Wise County Texas
- motorcarman
- Posts: 7
- Joined: Mon Nov 13, 2017 8:14 pm
Re: 35 Rem barrel nut washer.
I measured my unused barrel nut.
.875" OD
.610" ID
.130" Thick
Measure your barrel OD and ID of the barrel Jacket/Shroud to see if this is the correct washer.
The .35 Rem and .300 Savage are the same. The .25,.30 and .32 are the smaller one that I finally got to fit my 30-30 Rem (that is how my barrel is marked).
bob
.875" OD
.610" ID
.130" Thick
Measure your barrel OD and ID of the barrel Jacket/Shroud to see if this is the correct washer.
The .35 Rem and .300 Savage are the same. The .25,.30 and .32 are the smaller one that I finally got to fit my 30-30 Rem (that is how my barrel is marked).
bob
bob in rural Wise County Texas