Page 1 of 1

newly mfg barrel nuts and washers

Posted: Wed Aug 05, 2020 9:27 am
by Schofield
I am in the process of manufacturing new Barrel nuts and washers for the 35 Remington Model 8 and 81. I have had two prototype Barrel nuts manufactured for my own gun and they work flawlessly. I will machine whatever serration on the nuts and washers is required for your gun. Pricing is estimated to be around $35 plus shipping for the nut however it depends on response and how many we will make as we will make them all at once on CNC equipment. Any of you wishing to purchase these please leave me a note so I can get an idea of how many will we we'll have to make.Thanks, Curt

Re: newly mfg barrel nuts and washers

Posted: Wed Aug 05, 2020 9:46 am
by MinnesotaDan
I would like the nut and washer as I believe that the 35 Rem barrel nut/washer is the same as on the 300 Savage. Someone, please let me know if that is incorrect. (Obviously I need nut/washer for a 300 Savage).Thanks.

Re: newly mfg barrel nuts and washers

Posted: Wed Aug 05, 2020 7:59 pm
by cantgrowup
I, too, would like to buy a .35 Rem nut and washer (and according to the Henwood book, it is the same for the .300 Sav). I would also be interested in a barrel nut and washer combo for the .25/.30/.32 Rem in the mid-length (with 24 or 40 tooth configuration), if you choose to manufacture a set for those also.

Re: newly mfg barrel nuts and washers

Posted: Thu Aug 06, 2020 7:54 am
by Schofield
Thanks guys for your interest.I tried a pm to a couple of you and it would not send. I am having e-mail trouble.as I stated in my first post, I have to let the post run for some time to get as many orders as I can to keep cost down. Setting up to run 3 or 4 would be quite expensive.Please bear with me for several days. Thanks, Curt.

Re: newly mfg barrel nuts and washers

Posted: Fri Aug 07, 2020 10:04 pm
by Phyrbird
Curt,
A suggestion: the barrel nut washers have 2 tooth patterns to my knowledge. (Members correct if I'm wrong)
I have one or two with no serrations, one was in service, now replaced. If possible I'd appreciate your running them through the CNC mill to get them right.
Plus It could save time & be more cost effective if your washers could be machined one one side for the coarse pattern & the other side for the fine pattern. Making set up for only 2 pieces, the small ID for the 25-30-32 Rem & the other for the larger ID 35 Rem & 300 Sav. Two products to cover all the options. Blueing could be optional.
I too am out of the larger size (thread) barrel nuts. I think you can count on one for me.
Lastly, I am considering an optional add on for our Ladies. Would you be interested in a collaboration? If so I'd be glad to do some email or phone to discuss it.
Carl

Re: newly mfg barrel nuts and washers

Posted: Tue Aug 11, 2020 4:29 pm
by Schofield
pm sent to phyrbird

Re: newly mfg barrel nuts and washers

Posted: Fri Aug 21, 2020 2:37 pm
by Schofield
Guys I'm sorry but there was not enough response for me to justify making the barrel nuts. I really needed a dozen or so orders to make it worth the cost of setting up and running on a cnc machining center. I will continue watching my post for more interest. Thanks.

Re: newly mfg barrel nuts and washers

Posted: Sat Aug 22, 2020 10:19 am
by kenhwind
How many so far?
If it will help others out I'll buy one too.

Re: newly mfg barrel nuts and washers

Posted: Sat Aug 22, 2020 12:17 pm
by Schofield
only have 3 ordered, need 12-15 to make it happen.

Re: newly mfg barrel nuts and washers

Posted: Mon Aug 24, 2020 7:25 pm
by canuck
I just saw this - if you are willing to ship to Kanada, I'd be in for a couple

Re: newly mfg barrel nuts and washers

Posted: Wed Aug 26, 2020 4:30 pm
by cantgrowup
I'd already put in a request for a nut and washer. Do you have any idea of what they would cost per set if you get the 12-15 order? I may order two to help you make the minimum.

Re: newly mfg barrel nuts and washers

Posted: Tue Sep 01, 2020 6:00 pm
by Schofield
We have decided to make the nut and washer in sets (one nut and one washer).we will make the washer with the number of serrations you specify.(one side only). the cost of each set will be $52.00 ea.plus shipping. each set will be unblued. as mentioned in my earlier post I will need a minimum of 12 sets in order to proceed with manufacturing. thanks for being patient.

Re: newly mfg barrel nuts and washers

Posted: Fri Sep 11, 2020 7:47 pm
by Schofield
Surely some of you want a set of barrel but and washer.come on guys!

Re: newly mfg barrel nuts and washers

Posted: Sat Sep 12, 2020 5:03 pm
by cantgrowup
I'm in for a set. How do we order?

Re: newly mfg barrel nuts and washers

Posted: Sun Sep 13, 2020 5:27 pm
by Schofield
still have only 3 requests for orders. please read previous post, need 12 each.

Re: newly mfg barrel nuts and washers

Posted: Wed Sep 16, 2020 7:18 pm
by cantgrowup
Schofield....

I had been trying to determine the actual barrel thread sizes on another post, and someone just reminded me that you were going to possibly try and manufacture barrel nuts and probably know what sizes the threads are. Do you know what the thread dimensions are for the barrel nuts that you are considering making? I know that they are without a doubt 24 threads per inch, but the size is between 9/16" (too large) and 1/2" (too small), because I had bought both sizes in dies and taps to chase the "buggered up" threads on my Model 8 .30 Rem barrel. My gunsmith had to mount the barrel in his lathe and chase the threads using a 17/32" x 24 tpi setting.

Re: newly mfg barrel nuts and washers

Posted: Thu Sep 17, 2020 9:36 am
by grendel_45
I'm no expert, but I now have a 1910 Model 8 in 35 Remington...in the process of carefully taking this apart...
I would love to get a set of barrel-not/washer for this gun...please add me to the list...I think my PM is available...if not it's rwhuff@garlic.com

please let me know

Re: newly mfg barrel nuts and washers

Posted: Mon Nov 02, 2020 5:43 pm
by grendel_45
i take it this is NOT happening ?!?...i already requested a set and have heard nothing...

Re: newly mfg barrel nuts and washers

Posted: Tue Nov 03, 2020 7:35 pm
by Hibby83
You can put me on the list.

Re: newly mfg barrel nuts and washers

Posted: Thu Nov 05, 2020 12:05 am
by Fred
Put me down for a nut/washer set for a .35 Rem too.

Re: newly mfg barrel nuts and washers

Posted: Wed Nov 18, 2020 7:25 pm
by Schofield
Sorry I've been gone so long guys, but I had the dreaded covid and some other issues going on. concerning the 35 rem barrel nut and washer, It looks like six or maybe seven requests. As I stated before I need 12 orders to make it affordable. I will continue to watch this post for more requests. Thanks, Curt

Re: newly mfg barrel nuts and washers

Posted: Sun Jan 10, 2021 6:45 pm
by Konga
Curt,
I would like a barrel nut & washer set for a model 81 in 35 Remington. Thank you.

Re: newly mfg barrel nuts and washers

Posted: Tue Jan 12, 2021 8:42 pm
by Schofield
Looks like about 8 requests now. need 4 more.