30Rem and 32Rem brass

Items for sale or trade
Post Reply
GRUMPA
Posts: 24
Joined: Fri Apr 04, 2014 5:42 am

30Rem and 32Rem brass

Post by GRUMPA » Thu Jul 07, 2016 5:12 pm

For you folks that can't find any here's your chance. These are made from "NEW" 38-55 Starline brass, so when a person receives them they're getting brand new brass, just converted. These do get annealed so when a person receives them all they need to do is load them up and go bang.

These are $1ea plus shipping.

Funds: USPS money order or cash only

Folks....I've been doing conversions for years, no matter what it is there's never been a problem.

User avatar
Sarge756
Posts: 763
Joined: Sat Jan 01, 2011 10:17 am
Location: N.Florida on the coast

Re: 30Rem and 32Rem brass

Post by Sarge756 » Sat Jul 09, 2016 9:06 am

If they are as high quality as the 35Rem I got from you converted from mil. brass then they are well worth a buck each. There is interest here for 25Rem brass also. Are you making it or have plans to do so?
Thanks again for a quality product.
Joe
".......ain't many troubles that a man cain't fix
With seven hundred dollars and a thirty ought six."

GRUMPA
Posts: 24
Joined: Fri Apr 04, 2014 5:42 am

Re: 30Rem and 32Rem brass

Post by GRUMPA » Mon Jul 11, 2016 5:27 am

With the 38-55 brass I have I scraped out a good dozen trying to convert those into 25Rem. The 30 and 32Rem didn't have an issue being converted.

So the 25Rem I still do but those are made from Hydroformed 1x fired 30-30 cases.

Those 35Rem cases I do are made from Mil brass, much thicker and stronger brass. Those will last a person a long time and hold up much longer than factory fodder.

User avatar
Bandersnatch
Posts: 397
Joined: Tue Oct 21, 2014 3:48 am
Location: Lower Alabama

Re: 30Rem and 32Rem brass

Post by Bandersnatch » Mon Jul 11, 2016 8:57 am

I would be *very* interested in 30 and 25, if any were available.
I am the cat who walks by himself. And all places are alike to me.

GRUMPA
Posts: 24
Joined: Fri Apr 04, 2014 5:42 am

Re: 30Rem and 32Rem brass

Post by GRUMPA » Mon Jul 11, 2016 10:16 am

All a person has to do is PM me with cal and quantity. The Rem cases I do all the time, meaning when I get requests for them I make them up as the request comes in. I always have the parent cases, always have, I just don't convert a bunch and have them sitting on the floor just collecting dust.

I did that on another conversion, the 256Win mag, that same parent case is used for the 351 WSL as well. So here I have a butt-load of 256W sitting and someone wants 351 WSL but I ran out of the parent case.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest