Page 1 of 1

WTT Parts and more

Posted: Sun Aug 03, 2014 7:24 pm
by Phyrbird
Forum members,
I've some items you might want or need. (PICs at the bottom post)
The list:

In the Bin For Sale or Trade: (Trade usually better for both)
Update 5/4/20
A couple extractors 1 25-30-32 Rem, 1 35R or 300Sav
a couple bolt carrier links for M8/81s,
a 300 Sav Bbl, + a Bbl sleeve + a few parts for said sleeve. No buffer spring. (this is kinda rough finish, best for a project rifle)
An aftermarket forearm, walnut, it's only roughed out, Bbl channel is not completed.
1ea G&H base to fit our Ladies, 1 ea G&H base for unknown
Assortment of screws for the G&H scope mounts, tested to fit
Base mount screws or taper pins (yeah that's right taper) (1 sets)
2 ea G&H bases for Garand, Gone
some 1911 odds and ends parts

Ya'll get first Dibbs :!: :!:

Re: WTT Parts and more

Posted: Mon Aug 04, 2014 6:39 am
by Simmer down
I'm interested in the 30 Rem brass. How much and where do I send the money?

Re: WTT Parts and more

Posted: Sun Aug 17, 2014 2:47 pm
by Phyrbird
Thanks SimmerD (Don) very timely responses, glad I could help...

Carl

Re: WTT Parts and more

Posted: Tue Dec 06, 2016 7:06 am
by hacker51
I live in Kentucky, where do live at in Kentucky?

Re: WTT Parts and more

Posted: Tue Dec 06, 2016 11:15 am
by Phyrbird
South central Kentucky, see email above to open communications....
You understand a little caution, as a collector I try to vet those getting address.

Re: WTT Parts and more

Posted: Fri Dec 09, 2016 12:28 pm
by Phyrbird
Update:
FBI takedown bolt & lever, the one with the shoulder for the lock washer WTS or WTT

Some 300Sav barrel Assy parts; I don't need 3 barrels. I do need springs and barrel washer. The sleeve (w/ bushing & front sight) is rather pitted at the muzzle; could be a good candidate for a carbine conversion. WTS or WTT

Looking for 300Sav bolt carrier & bolt complete w/ all parts; got the link, unless you just don't wanna remove it.
Looking for a 35 Rem barrel (prefer M8 if possible) in reasonable shape, threads good, no major flaws in rifling/chamber or barrel block. Probably should have the matching barrel nut with it.
Still need a M8 forearm screw, it's OK if the loop is not perfect. For a restore project.
Could use some rear sight blanks for use with the peep sights. no preference manufacturer.

Re: WTT Parts and more

Posted: Sat Dec 10, 2016 12:25 am
by Sebastian21
Have a 35 Rem barrel. Barrel is frosted but has strong rifling. I think it will shoot good. No barrel nut. 150.00 shipped with a three day inspection return less shipping both ways.

Re: WTT Parts and more

Posted: Sat Dec 10, 2016 12:50 am
by Phyrbird
Sebastian,
Please send me an email, carlsandage@yahoo.com .
We can discuss, could you be interested in any of the trading material listed?
You can check with other trades we have managed; I have a fair satisfaction rate.

Yours
Carl

Re: WTT Parts and more

Posted: Sun Apr 23, 2017 8:16 pm
by Phyrbird
PICs of FBI takedown lever, note the step on the head. Included "C" washer, sorry no lockwasher, it didn't come with one.
IMG_20170423_161518.jpg
IMG_20170423_161518.jpg (397.82 KiB) Viewed 28400 times
IMG_20170423_161509.jpg
IMG_20170423_161509.jpg (414.31 KiB) Viewed 28400 times
Image

Re: WTT Parts and more

Posted: Sun Apr 23, 2017 8:24 pm
by Phyrbird
PICS of Lyman 41AT FBI sight. This one Sold. Note finish is about gone & gap around the flip aperture. Notice it has all the parts, even the little elevation arrow. Did not get the mount screws with, sorry.
IMG_20170423_163409.jpg
IMG_20170423_163409.jpg (229.64 KiB) Viewed 28400 times
IMG_20170423_163249.jpg
IMG_20170423_163249.jpg (263.27 KiB) Viewed 28400 times
IMG_20170423_163225.jpg
IMG_20170423_163225.jpg (278.21 KiB) Viewed 28400 times

Re: WTT Parts and more

Posted: Thu May 04, 2017 9:50 pm
by Phyrbird
Update:
Found 32 Rem RCBS dies, vintage in great shape. Available. ;) SOLD
Finally went back to the reloading supplier, found 30 Rem Graf new unprimed brass. :o
Got a few bags, maybe can trade some for stuff. Still got 2 bags SOLD
Am working on Fleabay seller account, will probably start moving any stuff the forum members don't need. Speak up :?: :?:
Ebay active; you know my moniker.

Re: WTT Parts and more

Posted: Fri Mar 30, 2018 9:55 pm
by Phyrbird
Bump cause my edit didn't show as a new post.... :oops:

Re: WTT Parts and more

Posted: Sat Nov 10, 2018 9:41 pm
by Phyrbird
Updated first post, See anything you like :?: :?:
See top of the list...

Re: WTT Parts and more

Posted: Wed Feb 13, 2019 8:12 pm
by Phyrbird
Bump cause my edit didn't show as a new post...

Re: WTT Parts and more

Posted: Thu Feb 14, 2019 4:33 am
by Roger
Hey Carl,
I was wondering if you sold either of your Lyman 41 sights.My email is in the address box below.
Thanks for your time,
Roger

Re: WTT Parts and more

Posted: Thu Feb 14, 2019 7:52 pm
by Phyrbird
Roger,
Email 2 U Thanks

Re: WTT Parts and more

Posted: Thu Mar 14, 2019 1:50 pm
by Phyrbird
Bump cause my edit didn't show as a new post...
PS I still need some rear barrel sight blanks for my Ladies....

Re: WTT Parts and more

Posted: Wed Jun 19, 2019 10:59 am
by Phyrbird
Updated.
I still have the FBI takedown lever when someone needs.

Re: WTT Parts and more

Posted: Wed Nov 20, 2019 11:56 am
by Huser91
Carl ,

In your first post I believe it said you had a 35 Rem. Barrel nut washer ? Might you still have it ? I'm searching high and low

Re: WTT Parts and more

Posted: Thu Nov 21, 2019 9:42 am
by Phyrbird
Huser,
I'm in process of cool weather catchup from hot season, will check soon. Know I've got some washers, just need to verify if they fit the 35 bbl. (these also should fit the 300Sav bbl) If you please it could be after T-day, OK?
Carl

Re: WTT Parts and more

Posted: Mon May 04, 2020 4:04 pm
by Phyrbird
Want to sell: Update 9/21
Starting at top left;
  • Griffin & Howe base for M8-81 or A5 style shotguns.One left
  • Lyman 41AT receiver sight Sold one last one still for sale
  • Extractor for 25-30-32 Remington calibers
  • Bolt link pin should fit all
  • Bolt lock rocker should fit all
  • Bottom: Williams scope mount for M8-81 & A5 Shotguns w/ one set of rings (both available) should fit all, 4 screws in row
Sold
  • Next @ top: Griffin & Howe mount kit bolts & taper pins
Can spare a couple
  • Top right: Griffin & Howe mount for unknown
Sold
  • Next down: M8 only Butt plate w/ toe & original screws
Sold
  • Hook style sling eyes for buttstock; original
  • FBI style takedown lever
I'm in process of 2 restores & am moving some parts for funds to support the restore of our Ladies. If you have need of any of these connect with me email: carlsandage@yahoo.com

IMG_20200504_161413.jpg
IMG_20200504_161413.jpg (608.9 KiB) Viewed 18908 times
Another view to help w/ details.
Sell parts for Forum.jpg
Sell parts for Forum.jpg (296.14 KiB) Viewed 18908 times

Re: WTT Parts and more

Posted: Mon Oct 12, 2020 5:20 pm
by Phyrbird
OK, add to the list:
One FBI barrel assembly, finish about 80%, clean inside, #301

pix288948003.jpg
pix288948003.jpg (209.82 KiB) Viewed 15128 times
Ebay s-l1600.jpg
Ebay s-l1600.jpg (361.21 KiB) Viewed 15128 times

Re: WTT Parts and more

Posted: Sun Sep 05, 2021 10:25 am
by Hibby83
Hello Phyrbird.

is this still available?
___Bottom: Williams scope mount for M8-81 & A5 Shotguns w/ one set of rings (both available) should fit all, 4 screws in row

My buddy's father has an 81 that is drilled for a williams scope mount but he doesn't have the mount.

Re: WTT Parts and more

Posted: Mon Sep 06, 2021 12:39 pm
by Phyrbird
Luke,
Sorry, it Fleabayed away. And the Williams site no longer lists them. they did a year ago, Shame

Re: WTT Parts and more

Posted: Wed Jun 15, 2022 9:11 am
by MrEShopper
Griffin & Howe base for M8? Do you still have the base? I would like to see a pic showing the mounting holes. I have a mount with rings and have been debating whether to use it or sell/trade it.

Re: WTT Parts and more

Posted: Wed Jun 15, 2022 9:19 am
by MrEShopper
Found a pic on one of your previous posts. That's a lot of holes. My 8 isn't a rare one, but that's a lot of holes. Hmm.

Re: WTT Parts and more

Posted: Mon Jan 02, 2023 4:14 pm
by Grid
Happy New Year!!
Hi do you still have the barrel lock and barrel lock spring that is in the picture above? The barrel lock spring is broken in my model 8 and I’m searching for one. Thanks for your help Reed

Re: WTT Parts and more

Posted: Sun Jan 08, 2023 1:08 am
by Phyrbird
Checking: I'll get back 2U

Re: WTT Parts and more

Posted: Fri Jan 13, 2023 7:29 am
by Grid
That would be great if you have it, the local gunsmith can’t seem to make one. Let me know if you have it so I can call off the gunsmith. Thanks

Re: WTT Parts and more

Posted: Sun Jan 15, 2023 9:33 pm
by Phyrbird
Just a heads up; decades ago I made a leaf spring from a hacksaw blade. Had to shape the contour, thin the leaf, bend the V with the right radius, & create the curl for the pin that worked the extractor. All for a 5mm rimfire rifle I had no way of getting ammo for. The heat treat was the hardest, took 3 tries, finally heated it to cherry, quench in 30 weight oil, then carefully heated the whole to a light blue, quench in H2O. The hardest was to get the blue not too dark, & not too light. The drop block German silver plated rimfire sold for $800 :o :shock: :? , a nice gain but I lost @ $2000 in my labor if it counted.....
BTW still ain't found it, KNOW I got one, more later...

Re: WTT Parts and more

Posted: Tue Jan 17, 2023 9:23 am
by chas1949
If you are careful with a bench grinder or dremal the flat springs for barrel lock and mag indicator can be made from the attached. Need to be careful not to get too hot while shapping as to not remove temper.
Rim lock springs
Rim lock springs
F7A6BAA9-6E20-4599-8564-3BC8E8BC76FF.png (617.55 KiB) Viewed 4051 times