WTT Parts and more

Items for sale or trade
Post Reply
User avatar
Phyrbird
Posts: 773
Joined: Mon Jan 07, 2013 10:53 pm

WTT Parts and more

Post by Phyrbird » Sun Aug 03, 2014 7:24 pm

Forum members,
I've some items you might want or need. Four long guns and a pair of Lyman Receiver sights. :)
The list:
1. Savage 720 12g 30" Bbl, # 5878xx w/ the dog and 2 quail engraved on the rt side and the 2 ducks or geese on the left. very good blue, clean wood (checkered) (not available)
2. Savage 755A 12g 28" Bbl w/ the later engraving on the receiver. Traded :)

3. Model 8 30Rem numbers all match, #556xx very good finish, at least 80% blue, some nicks and scratches in the straight stocks, no chips or gouges, metal butt plate w/ toe plate. Sold :)
4. Winchester M100 in 308, #1913xx Nice clean post '64 rifle, some light marks where a scope was mounted, handling wear on the aluminum trigger guard. Very good blue. Wood is a very good example of the basket-weave and leaf stocks. Williams Rec'r sight. TRADED :) I like the Governor real well
5. Lyman 41AT for M8/81, has the folding aperture, the main aperture was reamed out larger for someone's eyes. all parts work, still has the little elevation marker spring. no mount screws.
6. Lyman 45 for flat side receivers, NOT for Model 8/81, probably for Winchesters and Hi Wall rifles. no mount screws. Note this is the "Winder" sight.
about 60% blue, everything works, It too has the elevator spring
7. 2 Lyman PA (precision alignment) seater dies 243, and 270

8. A set of RCBS 270 dies. SOLD

9. 100 pcs bag of new Remington 30Rem brass. ;) And my source is dried up for a while... Got more, need some :?: :?:

In the Bin For Sale or Trade: (Trade usually better for both) Update
A couple extractors 1 25-30-32 Rem, 1 35R or 300Sav
some Contender scope mount hardware, Bueler, & more, rear & front sights for Contender .
a Pachymar swing over base for a Rem M600 SOLD
a couple bolt carrier links for M8/81s,
a couple firing pins
allen screws to fit the barrel rear sight on the barrel sleeve
(maybe) a Marbles tang sight for M8 & 81s: SOLD in Canada
a half dozen tang sight taps (Yeah that's right, probably the last of them)
some 1911 odds and ends parts

If you're in KY (a resident)we might meet for a hands on transfer or trade. Site members are welcome to visit if you'd prefer a personal hands on with the items. Email me for a visit, please. carlsandage@yahoo.com

Ya'll get first Dibbs :!: :!:
Last edited by Phyrbird on Fri Mar 30, 2018 9:52 pm, edited 6 times in total.
Phirbird

Simmer down
Posts: 17
Joined: Thu Jul 17, 2014 1:12 pm

Re: WTT Parts and more

Post by Simmer down » Mon Aug 04, 2014 6:39 am

I'm interested in the 30 Rem brass. How much and where do I send the money?

User avatar
Phyrbird
Posts: 773
Joined: Mon Jan 07, 2013 10:53 pm

Re: WTT Parts and more

Post by Phyrbird » Sun Aug 17, 2014 2:47 pm

Thanks SimmerD (Don) very timely responses, glad I could help...

Carl
Phirbird

hacker51
Posts: 3
Joined: Mon Dec 05, 2016 6:02 pm

Re: WTT Parts and more

Post by hacker51 » Tue Dec 06, 2016 7:06 am

I live in Kentucky, where do live at in Kentucky?

User avatar
Phyrbird
Posts: 773
Joined: Mon Jan 07, 2013 10:53 pm

Re: WTT Parts and more

Post by Phyrbird » Tue Dec 06, 2016 11:15 am

South central Kentucky, see email above to open communications....
You understand a little caution, as a collector I try to vet those getting address.
Phirbird

User avatar
Phyrbird
Posts: 773
Joined: Mon Jan 07, 2013 10:53 pm

Re: WTT Parts and more

Post by Phyrbird » Fri Dec 09, 2016 12:28 pm

Update:
FBI takedown bolt & lever, the one with the shoulder for the lock washer WTS or WTT

Some 300Sav barrel Assy parts; I don't need 3 barrels. I do need springs and barrel washer. The sleeve (w/ bushing & front sight) is rather pitted at the muzzle; could be a good candidate for a carbine conversion. WTS or WTT

Looking for 300Sav bolt carrier & bolt complete w/ all parts; got the link, unless you just don't wanna remove it.
Looking for a 35 Rem barrel (prefer M8 if possible) in reasonable shape, threads good, no major flaws in rifling/chamber or barrel block. Probably should have the matching barrel nut with it.
Still need a M8 forearm screw, it's OK if the loop is not perfect. For a restore project.
Could use some rear sight blanks for use with the peep sights. no preference manufacturer.
Phirbird

Sebastian21
Posts: 81
Joined: Fri Aug 28, 2015 1:06 pm

Re: WTT Parts and more

Post by Sebastian21 » Sat Dec 10, 2016 12:25 am

Have a 35 Rem barrel. Barrel is frosted but has strong rifling. I think it will shoot good. No barrel nut. 150.00 shipped with a three day inspection return less shipping both ways.

User avatar
Phyrbird
Posts: 773
Joined: Mon Jan 07, 2013 10:53 pm

Re: WTT Parts and more

Post by Phyrbird » Sat Dec 10, 2016 12:50 am

Sebastian,
Please send me an email, carlsandage@yahoo.com .
We can discuss, could you be interested in any of the trading material listed?
You can check with other trades we have managed; I have a fair satisfaction rate.

Yours
Carl
Phirbird

User avatar
Phyrbird
Posts: 773
Joined: Mon Jan 07, 2013 10:53 pm

Re: WTT Parts and more

Post by Phyrbird » Sun Apr 23, 2017 8:16 pm

PICs of FBI takedown lever, note the step on the head. Included "C" washer, sorry no lockwasher, it didn't come with one.
IMG_20170423_161518.jpg
IMG_20170423_161518.jpg (397.82 KiB) Viewed 2435 times
IMG_20170423_161509.jpg
IMG_20170423_161509.jpg (414.31 KiB) Viewed 2435 times
Image
Phirbird

User avatar
Phyrbird
Posts: 773
Joined: Mon Jan 07, 2013 10:53 pm

Re: WTT Parts and more

Post by Phyrbird » Sun Apr 23, 2017 8:24 pm

PICS of Lyman 41AT FBI sight. Note finish is about gone & gap around the flip aperture. Notice it has all the parts, even the little elevation arrow. Did not get the mount screws with, sorry.
IMG_20170423_163409.jpg
IMG_20170423_163409.jpg (229.64 KiB) Viewed 2435 times
IMG_20170423_163249.jpg
IMG_20170423_163249.jpg (263.27 KiB) Viewed 2435 times
IMG_20170423_163225.jpg
IMG_20170423_163225.jpg (278.21 KiB) Viewed 2435 times
Phirbird

User avatar
Phyrbird
Posts: 773
Joined: Mon Jan 07, 2013 10:53 pm

Re: WTT Parts and more

Post by Phyrbird » Thu May 04, 2017 9:50 pm

Update:
Found 32 Rem RCBS dies, vintage in great shape. Available. ;) SOLD
Finally went back to the reloading supplier, found 30 Rem Graf new unprimed brass. :o
Got a few bags, maybe can trade some for stuff. Still got 2 bags
Am working on Fleabay seller account, will probably start moving any stuff the forum members don't need. Speak up :?: :?:
Ebay active; you know my moniker.
Phirbird

User avatar
Phyrbird
Posts: 773
Joined: Mon Jan 07, 2013 10:53 pm

Re: WTT Parts and more

Post by Phyrbird » Fri Mar 30, 2018 9:55 pm

Bump cause my edit didn't show as a new post.... :oops:
Phirbird

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests