I just acquired a 1929 Model 8 in .30 Rem that is what I refer to as "Rode hard and put away wet" for a very reasonable price. I did a complete teardown which consisted of disassembling the action and also disassembling the barrel jacket assembly. To me, never handling one of these rifles before or seeing one of these before in my life, the springs seem a little weak. Does anyone know how much resistance there should be when pressing the barrel back into the action? I would think it would need to be a fair amount to keep the bolt from opening prematurely. I did a full cleaning of the action and parts and reassembled it. It is in need of a new buttstock (separated at the wrist and bolted back together with steel strap), firing pin, and another cam pin. However, short of that, I think it is still functional and has an immaculate bore on it. What do you guys think? I will try to attach a photo.
Also, what option of the Model 8 had the horn buttplate? Mine has one so I am curious if that is the standard option?
Aaron
Question Regarding Spring Power
-
- Posts: 1
- Joined: Mon Apr 19, 2021 11:20 am
Question Regarding Spring Power
- Attachments
-
- 08139BA7-EECE-416B-B662-8D7E12E55F83.jpeg (263.04 KiB) Viewed 2286 times
-
- 8AA44EF1-9416-4337-8BCE-E790CB3F778D.jpeg (340.77 KiB) Viewed 2286 times
Re: Question Regarding Spring Power
Cool score. Your nickname seems to fit the gun. ha
It's not easy to answer that question about pressure to reciprocate the barrel & bolt assembly. The fit, finish, condition and cleanliness of quite a few parts come into play for all that to happen.
I do notice that when I do a comparison of one barreled assembly from one in particular rifle to another i can tell a difference in the spring strength. They're both the same caliber and function with the same load just fine.
Good luck in your endeavor of getting the old war horse back in action.
The butt plate that you speak of is generally an early style "vulcanite/hard rubber". The metal bottom tang plate became standard equipment around 1921. Did you notice any serial numbers on the butt stock when you cleaned your rifle?
It's not easy to answer that question about pressure to reciprocate the barrel & bolt assembly. The fit, finish, condition and cleanliness of quite a few parts come into play for all that to happen.
I do notice that when I do a comparison of one barreled assembly from one in particular rifle to another i can tell a difference in the spring strength. They're both the same caliber and function with the same load just fine.
Good luck in your endeavor of getting the old war horse back in action.
The butt plate that you speak of is generally an early style "vulcanite/hard rubber". The metal bottom tang plate became standard equipment around 1921. Did you notice any serial numbers on the butt stock when you cleaned your rifle?