Need 81 lower tang screw

Information on Malfunctions and Care of your Model 8 & 81
Post Reply
uhjohnson
Posts: 171
Joined: Wed Aug 25, 2010 3:53 pm

Need 81 lower tang screw

Post by uhjohnson »

I need the tang screw that holds the stock on. Someone on this site posted a company that makes new reproductions and at the time I was sure there would be one on ebay but two months later, no luck. For now I will put a repro on until I find one in near perfect condition
[b]Member of Berwyn Rod and Gun Club since 1983, it is an outdoor range located in Bowie Maryland, if interested in joining call 301-261-7515 or 301-464-9830[/b]

You don't pay too much, you pay too soon
Fred
Posts: 146
Joined: Wed Feb 26, 2014 11:10 pm

Re: Need 81 lower tang screw

Post by Fred »

If you can't find one, send me a PM and I could probably make you one. If you want an original I could probably sell you my original and I'll re-make the one for my M81 that's been drilled and tapped for a scope and seen better days in general.
Post Reply