Barrel jacket bent

Information on Malfunctions and Care of your Model 8 & 81
Post Reply
uhjohnson
Posts: 155
Joined: Wed Aug 25, 2010 3:53 pm

Barrel jacket bent

Post by uhjohnson » Sat Apr 23, 2016 3:32 pm

I finely got a barrel assembly with a 1902 patent date (without sights) and when it arrived i noticed a little swell about 10 inches from the mating surface of the jacket head. After mounting to the receiver it appeared to bend downward, i removed it an placed it on a flat surface between the front of the jacket head and the back of the front sight block. I notched out the area for the threaded sight inserts and it stayed flat until the swell (9.25 inches) and in the next 10 inches it bends the thickness of two dimes or .100 (1 tenth of an inch). I have not taken it apart and have also noticed the barrel does come out past the barrel nut and when pushed back by hand, (removed from receiver), the barrel returns to battery ruff and clunky. There is a chance the barrel is not bent but the bend in the jacket could bow the barrel affecting placement.
Will this affect accuracy and shot placement after each firing, if it can be zeroed or is it anything to worry about

Please help because I have just notified the seller of the problem

Thanks
[b]Member of Berwyn Rod and Gun Club since 1983, it is an outdoor range located in Bowie Maryland, if interested in joining call 301-261-7515 or 301-464-9830[/b]

You don't pay too much, you pay too soon

Sebastian21
Posts: 83
Joined: Fri Aug 28, 2015 1:06 pm

Re: Barrel jacket bent

Post by Sebastian21 » Sat Apr 23, 2016 7:48 pm

I have several barrel jackets. Will have to check patient dates

User avatar
Phyrbird
Posts: 892
Joined: Mon Jan 07, 2013 10:53 pm

Re: Barrel jacket bent

Post by Phyrbird » Sat Apr 23, 2016 10:10 pm

UHJ,
Be sure to check in the barrel for a swell in the bore. Could've been used for a club or there might have been something else. Springs need inspection too.
Phyrbird
SOKY

User avatar
Bandersnatch
Posts: 371
Joined: Tue Oct 21, 2014 3:48 am
Location: Lower Alabama

Re: Barrel jacket bent

Post by Bandersnatch » Sun Apr 24, 2016 6:03 am

My guess is it was dropped out of an oak tree in Maine.
I am the cat who walks by himself. And all places are alike to me.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest