New member here, I'm from upstate NY,

New Member Introductions
Post Reply
jimdallas9596
Posts: 3
Joined: Mon Sep 06, 2021 10:23 am

New member here, I'm from upstate NY,

Post by jimdallas9596 »

I have two model 8's, a 25 Remington and a 35 Remington. I've been working on reloads for the 25 Remington, sometimes the primers back out on new brass, they are not flattened, and just back out very little, not sure if its headspace problems or not. The reloads are min. starting loads.
The 35 doesn't feed or eject properly, I've had two different gunshops work on it, but no one can make it run properly.
Sure hoping someone can point me in the right direction to get it running properly.
Thanks, Jim.
User avatar
Bandersnatch
Posts: 480
Joined: Tue Oct 21, 2014 3:48 am
Location: Lower Alabama

Re: New member here, I'm from upstate NY,

Post by Bandersnatch »

Howdy do!
I am the cat who walks by himself. And all places are alike to me.
jimdallas9596
Posts: 3
Joined: Mon Sep 06, 2021 10:23 am

Re: New member here, I'm from upstate NY,

Post by jimdallas9596 »

Hi
MinnesotaDan
Posts: 170
Joined: Sun Jul 21, 2019 4:17 pm

Re: New member here, I'm from upstate NY,

Post by MinnesotaDan »

Hello and welcome to the forum.

In order to possibly help with your extraction/ejection issues, 1)what type of problem exactly are you having? and 2) what have the gunsmiths tried in their attempts to fix your problem?

I might not be able to solve your problem(s), but hopefully we can get some of the guys on this forum to weigh in with their wealth of knowledge and help you out.
Post Reply