Tang sight Trouble

Talk about things other than the Model 8's and 81's
Post Reply
ice-man1973
Posts: 22
Joined: Thu Mar 01, 2012 8:54 pm
Location: Maine

Tang sight Trouble

Post by ice-man1973 »

Recently installed a lyman tang sight on my model 8 in .35 Rem. It shoots about 6" to the right @ 100yd. everything seems tight and 6" is too far off to drift the front sight over without it being too far out of the dovetail slot. looks like I may have to put the standard iron sights back on! anyone else have this issue?

norm
Posts: 81
Joined: Wed Jan 27, 2010 8:39 am

Re: Tang sight Trouble

Post by norm »

Nothing unusual about tang sight shooting left or right in my experience. Put some shims under one side or the other of the base. Strips cut from aluminum cans work for me. Trial and error method. Make sure you have enough ammo when you go to the range.

User avatar
Phyrbird
Posts: 955
Joined: Mon Jan 07, 2013 10:53 pm

Re: Tang sight Trouble

Post by Phyrbird »

Or some plastic shim stock, most machine supply houses stock it. Works real well, and can't scratch up blueing or a stock.
I suggest .001, .002, .005, and .010, the stock usually comes in letter size sheets.
Phyrbird
SOKY

User avatar
Bandersnatch
Posts: 415
Joined: Tue Oct 21, 2014 3:48 am
Location: Lower Alabama

Re: Tang sight Trouble

Post by Bandersnatch »

I used the brass strip that comes in an AR15 stripper clips under the peep sight on The Bride.
I am the cat who walks by himself. And all places are alike to me.

Post Reply