RCBS shell holder won't work

Ask about your Model 8 & 81
Post Reply
uhjohnson
Posts: 171
Joined: Wed Aug 25, 2010 3:53 pm

RCBS shell holder won't work

Post by uhjohnson »

just bought an RCBS #19 shell holder for loading my 30 Remington and the case will not go in. What holders can i use from the different manufactures

thanks
[b]Member of Berwyn Rod and Gun Club since 1983, it is an outdoor range located in Bowie Maryland, if interested in joining call 301-261-7515 or 301-464-9830[/b]

You don't pay too much, you pay too soon
User avatar
Phyrbird
Posts: 1037
Joined: Mon Jan 07, 2013 10:53 pm

Re: RCBS shell holder won't work

Post by Phyrbird »

Here you go:

https://www.grafs.com/uploads/technical ... ile/15.pdf

https://www.buffaloarms.com/shell-holder-chart

I've noted some of the "Remington" cases are a little sloppy around the rim, Grafs too. :evil: There are several shellholders just a little larger that work just as well. Look up the SAAMI case dimensions PDF file to make a choice. The dimensional data is important for reloaders to have anyway.... :ugeek:
Carl
Phyrbird
SOKY
uhjohnson
Posts: 171
Joined: Wed Aug 25, 2010 3:53 pm

Re: RCBS shell holder won't work

Post by uhjohnson »

Thanks Phyrbird

I checked all my loading die boxes that didn't have holders marked on them and found an RCBS#19 in a 35 Win SL that worked. I have three other RCBS 19's that don't
[b]Member of Berwyn Rod and Gun Club since 1983, it is an outdoor range located in Bowie Maryland, if interested in joining call 301-261-7515 or 301-464-9830[/b]

You don't pay too much, you pay too soon
User avatar
Phyrbird
Posts: 1037
Joined: Mon Jan 07, 2013 10:53 pm

Re: RCBS shell holder won't work

Post by Phyrbird »

Suggest you connect w/ RCBS, if they are like many other manufacturers in our chosen hobby they may take dramatic warranty action. I've had Ruger do considerable work on one of my babies, they charged Nada for parts & fitting of a cylinder. I only was out shipping for purloined parts. Weaver has offered refurbishment on some of their older K series scopes for ridiculous fee. Franklin Arsenal did not just replace a broken part they sent the whole unit new.
The mis-fitting holders could be replaced for free. You may have to send them a case & the holders, but, hey, if their stuff is out of spec they do make good....
Carl
Phyrbird
SOKY
cantgrowup
Posts: 129
Joined: Tue Apr 23, 2019 9:27 am

Re: RCBS shell holder won't work

Post by cantgrowup »

Well, that's not very comforting. I just ordered two RCBS #19 shellholders to use in loading my new .30 Rem Model 81. I always order two shellholders so that one can remain in the press, and one in the primer tool. I just ordered a bunch of .30 Rem from Graf, so if the shellholders won't fit, RCBS is going to hear from me... and not in a good way!
User avatar
Phyrbird
Posts: 1037
Joined: Mon Jan 07, 2013 10:53 pm

Re: RCBS shell holder won't work

Post by Phyrbird »

AAWWW, be nice, Mom always said you get more flies with sugar than vinegar. :lol: :twisted:
Phyrbird
SOKY
User avatar
Bandersnatch
Posts: 480
Joined: Tue Oct 21, 2014 3:48 am
Location: Lower Alabama

Re: RCBS shell holder won't work

Post by Bandersnatch »

Any Shell holder that fits .40 S+W will fit .30.
I am the cat who walks by himself. And all places are alike to me.
kenhwind
Posts: 265
Joined: Tue Jun 23, 2009 6:50 am

Re: RCBS shell holder won't work

Post by kenhwind »

I just looked in my Lyman reloading manuals and it looks like the 6.8 SPC and .30 Rem have the same rim diameter with 0.001 difference.
Lyman has a shell holder compatibility chart and the Lyman #15 is the same for 6.8 SPC; 40 S & W; & 30 Rem.
The chart lists the Redding #5, which is what I use as the same for 6.8 & 40. the chart doesn't list 30 Rem.

But the chart lists a RCBS #27 for the 40.

If you're using the Graf's / Quality cartridge brass make sure the brass isn't out of spec.

There is some variations in the dimensions and cases and shell holders, and while listed as interchangeable this isn't always the case. I've experienced this with the .38 Super W-W brass.
KEN
Post Reply