Need COL for .32 Rem with Speer 170gr jacketed SPFN

Ask about your Model 8 & 81
Post Reply
kenhwind
Posts: 184
Joined: Tue Jun 23, 2009 6:50 am

Re: Need COL for .32 Rem with Speer 170gr jacketed SPFN

Post by kenhwind » Sun Apr 29, 2018 3:58 pm

I had a Model 8 .32 Remington barrel assembly and used the Hornady 170 grain .321 as well as the Speer bullet and crimped on the bullet cannelure.
My older Lyman Reloading Manual lists a Max OAL as: 2.525

These worked just fine imo, but they are a bit longer then the factory .32 Remington load, with the Speer bullet load oal being a bit shorter then the Hornady. I used a .30 Remington as a guide as I have some Winchester loads in .30 Rem.

.30 Remington Winchester Silverttip: OAL: 2.508
.32 Remington Grafs brass Hornady 170 grain .321 bullet: OAL: 2.565
.32 Remington grafs brass Speer 170 Grain .321 bullet: OAL: 2.534

load data: http://stevespages.com/321_3_170.html
KEN

User avatar
Phyrbird
Posts: 875
Joined: Mon Jan 07, 2013 10:53 pm

Re: Need COL for .32 Rem with Speer 170gr jacketed SPFN

Post by Phyrbird » Mon Apr 30, 2018 4:02 pm

Good one Ken 8-)
Phyrbird
SOKY

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest