Model 81 and 30 Rem handloads

Ask about your Model 8 & 81
Post Reply
Mikeshoe72
Posts: 84
Joined: Sun Apr 03, 2016 8:18 pm

Model 81 and 30 Rem handloads

Post by Mikeshoe72 »

I was chronographing my handloads in 30 Rem today and was shocked to see a five shot average of 2,495 fps! It's 31 grains of IMR 3031 and a 150 gr. Sierra round nose. I've been using this load for years, never knowing it was a bit warm. I'm gonna double check to make sure my chrony wasn't somehow to blame. Any thoughts?
User avatar
Hardrada55
Posts: 277
Joined: Thu Feb 05, 2009 1:40 pm
Location: Southwest Oklahoma
Contact:

Re: Model 81 and 30 Rem handloads

Post by Hardrada55 »

You're at 2495fps with 31 grains of 3031. Something doesn't sound right. Quoting another cite, "Lyman Reloading Manual included data showing that the 150 grain Core-Lokt RN bullet (SD .226) could be driven to a MV of 2123 fps by 30.0 grains of IMR 3031 powder and a MV of 2364 fps by 33.0 grains of IMR 3031."
...the right of citizens to bear arms is just one more guarantee against arbitrary government, one more safeguard against the tyranny which now appears remote in America..."
- Hubert H. Humphrey, "Gun" magazine, Feb. '60
Mikeshoe72
Posts: 84
Joined: Sun Apr 03, 2016 8:18 pm

Re: Model 81 and 30 Rem handloads

Post by Mikeshoe72 »

I'm new to using a chronograph, and I may not have it far enough away. I had it at ten feet from muzzle, but I've read that the chrony really should be 15' to 20' out to avoid false readings.
Sebastian21
Posts: 84
Joined: Fri Aug 28, 2015 1:06 pm

Re: Model 81 and 30 Rem handloads

Post by Sebastian21 »

Most are set about 6 to 10 feet I have never seen one at 20 feet.
User avatar
Phyrbird
Posts: 1037
Joined: Mon Jan 07, 2013 10:53 pm

Re: Model 81 and 30 Rem handloads

Post by Phyrbird »

Cross check it. An air rifle or pistol is a cheap way. If it consistently gives errors send it back for calibration.
This could be dangerous with faulty readings.
Another thought, I've heard of some of our ladies having smaller bores (.307-.306) than .308; this could cause increased pressures and velocity. Have you check the bore diameter?
Phyrbird
SOKY
Post Reply