Stripper Clips for 8's and 81's

Ask about your Model 8 & 81
Post Reply
Cozahome
Posts: 26
Joined: Fri Jul 17, 2009 9:33 am
Location: Springdale, Arkansas

Stripper Clips for 8's and 81's

Post by Cozahome »

I have a couple of brass stripper clips that fit the .30 Rem. 81 that I have. Do the protrusions on the clips go into the receiver on stay on top? The ones that I have will not insert into the receiver. The clips are marked 30 Remington.

Any advise would be greatly appreciated.

Terry
Cozahome
Posts: 26
Joined: Fri Jul 17, 2009 9:33 am
Location: Springdale, Arkansas

Re: Stripper Clips for 8's and 81's

Post by Cozahome »

That's what I thought it should do, however the clips for the .30 will not go into the groove.

Thanks
User avatar
81police
Posts: 2613
Joined: Thu Feb 05, 2009 12:12 pm
Location: TEXAS

Re: Stripper Clips for 8's and 81's

Post by 81police »

Doesn't sound like they're Remington 8/81 stripper clips to me.
Cam Woodall
Site Co-Administrator
Cozahome
Posts: 26
Joined: Fri Jul 17, 2009 9:33 am
Location: Springdale, Arkansas

Re: Stripper Clips for 8's and 81's

Post by Cozahome »

They are marked 30, 32 on the clips, it is possible that they may be for a different model rifle.
User avatar
35Rem
Posts: 123
Joined: Thu Feb 05, 2009 3:59 pm
Location: SE Alabama

Re: Stripper Clips for 8's and 81's

Post by 35Rem »

the little 'ears' located in the middle of the clip are stops, so the clip doesn't go in too far.

Image
Image
War Eagle!
Post Reply