Page 1 of 1

Stripper Clips for 8's and 81's

Posted: Fri Aug 14, 2009 1:02 pm
by Cozahome
I have a couple of brass stripper clips that fit the .30 Rem. 81 that I have. Do the protrusions on the clips go into the receiver on stay on top? The ones that I have will not insert into the receiver. The clips are marked 30 Remington.

Any advise would be greatly appreciated.

Terry

Re: Stripper Clips for 8's and 81's

Posted: Sun Aug 16, 2009 2:08 pm
by Cozahome
That's what I thought it should do, however the clips for the .30 will not go into the groove.

Thanks

Re: Stripper Clips for 8's and 81's

Posted: Sun Aug 16, 2009 2:54 pm
by 81police
Doesn't sound like they're Remington 8/81 stripper clips to me.

Re: Stripper Clips for 8's and 81's

Posted: Mon Aug 17, 2009 7:40 am
by Cozahome
They are marked 30, 32 on the clips, it is possible that they may be for a different model rifle.

Re: Stripper Clips for 8's and 81's

Posted: Mon Aug 17, 2009 8:50 am
by 35Rem
the little 'ears' located in the middle of the clip are stops, so the clip doesn't go in too far.

Image
Image