thegreatmodel8.remingtonsociety.com

Phyrbird

If you do happen across one with a separation of lever & shaft:: http://thegreatmodel8.remingtonsociety.com/forums/viewtopic.php?f=20&t=3441&p=11787&hilit=safety+locktite&sid=349040b2120e72ed1db75827256503d6#p11787 This may not be a permanent repair as a new milled pin hole, but ...

Phyrbird

R-man I have had both 30 & 32 Rem split. But it was older original loads, the age of brass & storage conditions can have that effect. Annealing usually corrects necks or shoulder splits, but one gotta pull bullets for that. I've yet to figure out a good way to remove old primers safely B4 th...

Phyrbird

Check this:

http://thegreatmodel8.remingtonsociety. ... 948#p18713

Phyrbird

HUHNH

Chas you may be right, the above photo does show an unusual clearance. Any body got Dims on this difference??

Phyrbird

I must agree w/ Ken. The physics always apply, unless you go Quantum. Our Ladies operate on recoil momentum not energy, the product of mass & velocity primarily. With some offset due to the acceleration in the barrel of the projectile from rest. I personally have experience with the results. My ...

Phyrbird

We like personality

Plus it looks like someone did a reasonable restoration. The scarfs are heritage in my opinion.
Carl

Phyrbird

Jean,
Welcome, good luck on the parts. You may find them easier on the European market. I also suggest a review of the FN 1900 page on this home site. It's informative,just not that detailed on the magazine...

Phyrbird

Anybody need Herters loading parts? Got a couple specialized shellholders SOLD and a primer arm kit. Near NIB. ;) Would consider a partial trade for a Lyman Trueline Jr shellholder adapter for standard shellholders. 8-) Bump: still got the 32 Rem RCBS dies(sold), who wants 'em? still got Lyman 243&...

Phyrbird

Updated.
I still have the FBI takedown lever when someone needs.

Phyrbird

117, The HuntingBC site requires a registration to get at pics, thought you should know. A way to pump up members, they should consider a viewable alternative, not just lock everyone out. I'll try it out, just saying. Carl Update: REg worked; a nice lady, still got her stuff, Congrats on the bear. W...

Phyrbird

AH HA

Another victim of the dread collector's disease.
Told you these old rifles pine for their relatives, but glad you are having such good luck with your efforts.
A really great photo of the group, congrats..
Carl

Phyrbird

AAWWW, be nice, Mom always said you get more flies with sugar than vinegar.

Phyrbird

A start: http://thegreatmodel8.remingtonsociety.com/forums/viewtopic.php?f=7&t=5166&sid=4c30963a75f04dd38d0d21084071c9f5 http://thegreatmodel8.remingtonsociety.com/forums/viewtopic.php?f=12&t=5374&sid=4c30963a75f04dd38d0d21084071c9f5 From Stevespages: 150 Grain Bullet--IMR-4320 From ...

Phyrbird

This thread is a Really good reason to have a method for measuring headspace/shoulder of our fired rounds. I found the Hornady gauge for this is a great help. The first device I have found to test this reliably. Cheap insurance!! I also noticed on some cases the diameter of the collars are very clos...

Phyrbird

Adam, Glad to hear the post-op therapy is helping your both, Keep on keeping on. I too am interested in the Kreiger mods. As I have the "Not" Kreiger & 3 early mags that don't use the side springs I'd like to mod a couple to make Xtra magazines for mine. It is different from the classi...

Phyrbird

Welcome Back, Welcome Back, U knowfrom Kotter.

I know about the therapy dragging on, from the back surgery couple years ago...
Stay with the stretching & strength building!! It does help, maybe just not soon enough t suit us...
Carl

Phyrbird

Auger: a wood boring bit, spiral, w/cutters that cut very smooth holes. (unless you break thru the back) No rasp here. https://www.irwin.com/tools/browse/drill-bits/woodboring-drill-bits/auger-bits the hole referenced in our posts is the one the receiver tube for the recoil spring slides in the stoc...

Phyrbird

you might check this topic, many of us have the same problem with the early Ser# 81s.

http://thegreatmodel8.remingtonsociety. ... 078#p15488

Phyrbird

Check these out: :shock: https://www.rockislandauction.com/detail/76/3571/remington-model-8f-premier-grade-semiautomatic-rifle https://www.rockislandauction.com/detail/76/3572/remington-model-8f-premier-grade-semiautomatic-rifle https://www.rockislandauction.com/detail/76/1412/remington-model-241-pr...

Phyrbird

Jack I think you are right, did you visit and infect them with our disease

Gotta be the dread Jackitis

Yes I am glad There is no vaccine

Phyrbird

Nice Congrats

Phyrbird

Suggest you try the Hornady 140g Monoflex, I'm having pretty good luck with them & Leverrevolution powder. Another potential could be the 160g FTX. These are a little lighter, great ballistic coefficient, with modern design for 30-30 velocities. The Monoflex being a solid has great accuracy pote...

Phyrbird

Noticed you got one with the top-toe buttplate that is a good find. & in 25 Rem, had one almost the same & had to trade for a Inglis. It too has JMB designs. Good luck with the pair, watch out though, they'll soon be whining :cry: for their relatives. Then infect you with Jackitis :!: :lol: ...

Phyrbird

I've used a special Loctite to hold this type of parts with great success. This might help: http://thegreatmodel8.remingtonsociety.com/forums/viewtopic.php?f=20&t=3441&p=11787&hilit=safety+locktite&sid=1bd2d529cf1e99757856471ea8d6ced9#p11787 You will definitely need a new safety scre...

Phyrbird

boy, that would mess up the take down length

Phyrbird

For the vintage that is one fine example of a FN, Congrats. Wish I could manage find one...
Carl

Phyrbird

My compliments to a neal if he's here on the forum. I think you got a real deal. Let us know if you need help w/ the restore. Wish I couldv'e hung with you longer

Phyrbird

Not less ya win da Lottery

Phyrbird

Yup, I was right, can't afford it.

Phyrbird

Found these, curious & curiouser: https://www.gunsinternational.com/guns-for-sale-online/rifles/remington-rifles-custom-shop/remington-model-8-40-d-41-factory-engraved-deluxe-rare-caliber-25-35-remington.cfm?gun_id=101186867 https://www.gunsinternational.com/guns-for-sale-online/rifles/remington...

Phyrbird

Bump cause my edit didn't show as a new post...
PS I still need some rear barrel sight blanks for my Ladies....

Phyrbird

Guess who has a sight(s) :?: :D Of course I would need some correct #5 screws :oops: to mount it. I wonder if any of our members has a spare front sight for such a restoration project? 8-) If not I have a tall Williams sight that would serve, just not be original. :roll: I also have the takedown lev...

Phyrbird

Is it or one that is a 1950 repair? I see 41AT screw holes, but no Partridge front sight. Yeah the left side stamp is similar.

https://www.gunbroker.com/item/802017278

Phyrbird

Find ?? No.
Marbles folding aftermarket sight for the Model 8, hang on to the screws they are hard to find & pay for too.

Phyrbird

Respects, Have a safe tour & a great (model 8) read

. If you like the book I've another on a "Browning" Diamond you will love.

Phyrbird

These'll get you started: https://www.ebay.com/itm/Remington-81-trigger-474lot/173128314599?hash=item284f406ee7:g:ivkAAOSwZ5hab2Q2 https://www.ebay.com/itm/Remington-81-parts-300-savage-474lot/173128269584?hash=item284f3fbf10:g:SOsAAOSwATtab14m https://www.ebay.com/itm/Remington-Model-8-bolt-return-...

Phyrbird

Oh Yeah, theats what I'm talkin' bout

Phyrbird

To solve the cookie mystery; its an old fashioned anti rust sponge. It probably has a desiccant & an O2 absorber originally. Now it's kinda crumbly. I leave in place cause it may have been placed during the repair. Not likely, just maybe.

Phyrbird

Try these:

https://www.flickr.com/photos/buster_ch ... 271360342/

https://www.youtube.com/watch?v=OavHC8CrutI

http://thegreatmodel8.remingtonsociety. ... sembly.pdf

Phyrbird

Jack, Please excuse a small side trip from all the beauties. Just had a thought, could my Tattooed Lady have been the model for the FBI series? :?: :?: Same receiver sight, same sling swivel, no barrel sight, just in a harder hitting caliber. http://thegreatmodel8.remingtonsociety.com/forums/viewtop...

Phyrbird

RMan, a quick note; keep an eye :shock: on the bolt rotation. When you push back it can turn out of line w/ the bbl block. If so, no sweat, ;) pull bolt back @ half way, (releases the bolt lock) then push it back vertical with a dowel or such. Many of these rifles have sold "busted" becaus...

Phyrbird

Thanks Sage Sarge, good detail. The small stuff sounds easier than I thought. Still I've several pieces longer needing finish for a restore as you have done. No $$ for tanks & heater. By the way, what type of pot you use? heard stainless is not a great idea.... :?: Just an idea, if you ever desi...

Phyrbird

Welcome, Nice Ladies. I like the top toe buttplates too.

Phyrbird

Yeah my Left rear pocket keeps coming up empty

Phyrbird

Great work. Sarge.
Curious, what do you use for metal finish? I need GOOD one, & can't afford tanks burners, salt etc. for my small jobs...

Phyrbird

Eric,
Got one on rifle, not available. You are right I've seen 2 on auction, unrealistic prices. Wish we knew the origin of these, I know I saw pictures elsewhere

I beleive a couple of our members have these, doubt any are spares....

Phyrbird

Sarge you should see the M11 in my brother's rack. Even prettier, love shooting w/ the 2 ivory beads on the vent rib, just doesn't have all the scroll work.

Still she's prettier.
Try Pepcid AC for the heart burn works for me

Phyrbird

Just thought I'd give members a heads Up. There are some pretty Ladies selling on GI: https://www.gunsinternational.com/guns-for-sale-online/rifles/remington-rifles-semi-auto/remington-model-8-d-grade-in-300-savage.cfm?gun_id=101139552 https://www.gunsinternational.com/guns-for-sale-online/shotguns/...

Phyrbird

Uhh-huh Uhh-huh, lets Do it right here

(Sorry I get carried away)

Phyrbird

OOh I need more pics of details. Not to hyjack this thread.
Could a grand & mighty Canuck start another, please.
Canuck, the sight looks as if it could be measured from the bottom of the dovetail to top as well??

thegreatmodel8.remingtonsociety.com

The only place on the web, dedicated to these great rifles!

Search found 1038 matches