Search found 168 matches

by uhjohnson
Sun Aug 22, 2021 2:59 am
Forum: For Sale or Trade
Topic: FREE Dies
Replies: 4
Views: 389

Re: FREE Dies

Yes it was a good deal and experience
by uhjohnson
Tue Aug 10, 2021 7:03 pm
Forum: For Sale or Trade
Topic: FREE Dies
Replies: 4
Views: 389

Re: FREE Dies

I'll take it
by uhjohnson
Mon Jul 19, 2021 8:41 am
Forum: Q & A about the 8/81
Topic: Need .25 Rem reloading advice
Replies: 3
Views: 2262

Re: Need .25 Rem reloading advice

Did you crimp, if so, what did you use
by uhjohnson
Sun May 30, 2021 5:05 pm
Forum: Troubleshooting / Maintenance
Topic: Rear sight mount missing
Replies: 4
Views: 4553

Re: Rear sight mount missing

Here is what it looks like, let me know if you still need one
5F32FE47-52BC-4BE2-AF81-CA4F00F6AC5F.jpeg
5F32FE47-52BC-4BE2-AF81-CA4F00F6AC5F.jpeg (33.84 KiB) Viewed 1000 times
by uhjohnson
Sun Sep 13, 2020 8:56 am
Forum: Q & A about the 8/81
Topic: Tang sight
Replies: 1
Views: 1305

Tang sight

i have an FBI barrel assembly and want a tang sight. What is the best sight to look for and should i get a screw in aperture to go with it
by uhjohnson
Sat Aug 29, 2020 3:53 pm
Forum: Q & A about the 8/81
Topic: Yoke serialization
Replies: 1
Views: 1345

Yoke serialization

I have two model 8's without a serialized yoke. Did the yoke( i have also heard it called the barrel jacket/shroud head) have the guns serial number stamped at the bottom during the manufacture or was it stamped during a repair. Or is it possible a serialized yoke was replaced during a repair with a...
by uhjohnson
Sat Jun 06, 2020 2:23 pm
Forum: Q & A about the 8/81
Topic: NOS Buffer spring
Replies: 2
Views: 1495

NOS Buffer spring

Picked this up on Ebay for 35 dollars, i don't think it has ever been used. Look at the top coil - it isn't touching the second coil. I think this is where the first noticeable compression would start. Do you think it is NOS
by uhjohnson
Thu May 28, 2020 2:52 pm
Forum: Troubleshooting / Maintenance
Topic: Need buffer spring for model 8 .35 rem.
Replies: 2
Views: 1790

Re: Need buffer spring for model 8 .35 rem.

What buffer spring is in your lady
by uhjohnson
Mon Feb 17, 2020 5:03 pm
Forum: Q & A about the 8/81
Topic: FBI BARREL ASSEMBLY?
Replies: 2
Views: 2130

FBI BARREL ASSEMBLY?

Saw this on ebay and thought, wow, an FBI barrel assembly when i saw the front sight. According to the seller there aren't any holes to mount a rear sight. i don't know why he didn't have a picture from the top showing a smooth barrel jacket but I am grateful he didn't, possibly there would have bee...
by uhjohnson
Sun Jan 26, 2020 1:34 pm
Forum: Q & A about the 8/81
Topic: To disassemble or not?
Replies: 13
Views: 5479

Re: To disassemble or not?

I have taken at least 10 completely apart and if you don't have the CBR tool, i agree that the machinist ruler of the correct thickness (.075-.078) and an adjustable wrench is the way to go. I do not loosen the barrel nut or the Barrel Jacket Bushing while it is attached to the receiver, instead i u...
by uhjohnson
Sat Jan 25, 2020 6:28 pm
Forum: For Sale or Trade
Topic: New Rem Model 8/81 barrel tool for sale (Second batch is ready for sale)
Replies: 24
Views: 12296

Re: New Rem Model 8 barrel tool for sale

You need to comission a tool like this because your tabs will break when trying to loosen a stubborn BJB. I use a machinist square ruler of the correct thickness with a large adjustable wrench in place of the tool shown because it is not available
by uhjohnson
Fri Nov 15, 2019 3:37 pm
Forum: The Great Model 81 'Woodsmaster'
Topic: Good one Got away
Replies: 4
Views: 4051

Re: Good one Got away

We will preserve this one
Screenshot_20191115-163349_Chrome_compress44.jpg
Screenshot_20191115-163349_Chrome_compress44.jpg (158.18 KiB) Viewed 3817 times
by uhjohnson
Thu Oct 10, 2019 4:04 pm
Forum: Troubleshooting / Maintenance
Topic: Need 81 lower tang screw
Replies: 1
Views: 1874

Need 81 lower tang screw

I need the tang screw that holds the stock on. Someone on this site posted a company that makes new reproductions and at the time I was sure there would be one on ebay but two months later, no luck. For now I will put a repro on until I find one in near perfect condition
by uhjohnson
Sun Sep 08, 2019 10:58 am
Forum: Troubleshooting / Maintenance
Topic: Segmented follower spring
Replies: 3
Views: 3119

Segmented follower spring

My follower came out of the magazine well like a Jack in a box and I do not know how to orient the spring to get it back together right the first time. I was surprised to see how it was put together with riveted segmented pieces.
by uhjohnson
Mon Jul 08, 2019 5:48 pm
Forum: The Great Model 81 'Woodsmaster'
Topic: 81 butt stock
Replies: 1
Views: 2588

81 butt stock

I won this butt stock and want to know if it is for an 81. I was hesitant to bid because the comb wings (if this it what they are called) don't quite look right. I think they should be angled more downward.

https://www.gunbroker.com/item/820022601
by uhjohnson
Sat Mar 09, 2019 5:13 am
Forum: For Sale or Trade
Topic: SOLD
Replies: 10
Views: 9969

Re: WTS .32 Model 8 price drop

your finger must hurt from all the yelling you are doing, You had a picture posted that had the illusion of a crack, again ---- really nice 8. if you could post the picture again of the tapered comb that alluded to a crack we could see what i saw. i am a little confused, in the first post your are a...
by uhjohnson
Fri Mar 08, 2019 4:18 pm
Forum: For Sale or Trade
Topic: SOLD
Replies: 10
Views: 9969

Re: WTS .32 Model 8 price drop

the picture (#10) you removed was taken from above showing the receiver and only the tapered riser of the stock just behind the upper tang, from that angle it appeared to be a crack. Nice 8 with better pictures.
by uhjohnson
Wed Mar 06, 2019 5:17 pm
Forum: For Sale or Trade
Topic: SOLD
Replies: 10
Views: 9969

Re: WTS .32 Model 8 price drop

You forgot to mention the last picture shows a heavy crack running from the top tang and you don't show how far it goes
by uhjohnson
Mon Feb 11, 2019 5:58 pm
Forum: The Great Model 81 'Woodsmaster'
Topic: Sights
Replies: 3
Views: 4911

Re: Sights

My way of preventing a front sight block breakage while drifting is taking a spring loaded clothespin, gluing it, straighten the angle on the inside to fit between the jacket and the sight as well as reducing the height so the jacket sits flat on a table.
by uhjohnson
Sun Feb 10, 2019 5:28 am
Forum: Troubleshooting / Maintenance
Topic: Rear sight mount missing
Replies: 4
Views: 4553

Rear sight mount missing

I am in need of the rear sight mounting block with the female threads protruding through the jacket for centering and attaching the rear sight and is permanently mounted. If I can find a jacket for parts is it soldered or are the threaded extensions mashed a little, forming a press fit. At this poin...
by uhjohnson
Wed Jan 30, 2019 6:54 am
Forum: Q & A about the 8/81
Topic: Short cam pins
Replies: 2
Views: 2299

Short cam pins

I bought two cam pins off Ebay and they are shorter than any 8/81 pins I have worked with. They are the same diameter .249 however they are shorter .459. All the pins I have worked with in the past are between .545 and .561. Will these work work in a bolt without creating a hazard and did Remington ...
by uhjohnson
Wed Jan 30, 2019 6:03 am
Forum: Q & A about the 8/81
Topic: RCBS shell holder won't work
Replies: 7
Views: 5311

Re: RCBS shell holder won't work

Thanks Phyrbird

I checked all my loading die boxes that didn't have holders marked on them and found an RCBS#19 in a 35 Win SL that worked. I have three other RCBS 19's that don't
by uhjohnson
Sun Jan 27, 2019 9:24 am
Forum: Q & A about the 8/81
Topic: 35 Rem tomato stake barrel
Replies: 2
Views: 2439

35 Rem tomato stake barrel

I have a 35 Rem barrel that is too crusted to shoot, is it possible to rechamber it to another caliber that won't tear up the gun. What I had in mind was opening the 35 to a .375 and keep the loads reduced to just cycle the action. After I opened it, it reminded me of the 35 Herrett with a very smal...
by uhjohnson
Sat Jan 26, 2019 2:05 pm
Forum: Q & A about the 8/81
Topic: RCBS shell holder won't work
Replies: 7
Views: 5311

RCBS shell holder won't work

just bought an RCBS #19 shell holder for loading my 30 Remington and the case will not go in. What holders can i use from the different manufactures

thanks
by uhjohnson
Sun Jan 20, 2019 3:29 am
Forum: For Sale or Trade
Topic: 30 Rem barrel
Replies: 2
Views: 3411

Re: 30 Rem barrel

Without anything for sale or trade do you want to sell the .30 barrel
by uhjohnson
Sun Jan 13, 2019 2:17 pm
Forum: For Sale or Trade
Topic: M81 stock set for sale
Replies: 1
Views: 3255

Re: M81 stock set for sale

Is the stock still available

Thanks
by uhjohnson
Sat Dec 22, 2018 5:02 pm
Forum: Troubleshooting / Maintenance
Topic: disassembly video
Replies: 1
Views: 1784

disassembly video

I like this disassembly recording very much and think it should be included with the others in the sticky. I like the fact he tells us not to remove the bolt carrier latch screw and the bolt lock screw, these are actually pins that are hard to remove without getting munged up. https://www.bing.com/v...
by uhjohnson
Sat Dec 22, 2018 3:06 pm
Forum: Troubleshooting / Maintenance
Topic: Loose carrier pins
Replies: 1
Views: 1757

Loose carrier pins

I have my bolt assembly out and the firing pin retaining pin and the link pin is so loose I can push them out with a round tooth pick. I have other pins and they are also loose. I cleaned the pins and channels with denatured alcohol and applied blue Loctite to one side, once the pin came out far eno...
by uhjohnson
Tue Dec 04, 2018 6:10 pm
Forum: Troubleshooting / Maintenance
Topic: barrel head
Replies: 4
Views: 3054

Re: barrel head

a friend was telling me what I am calling the head is a barrel extension. in the parts list only the barrel is numbered(29) however it is two pieces because both pieces have marks that align like a barrel and a receiver on a lot of rifles. has anyone ever taken one apart
by uhjohnson
Sat Dec 01, 2018 4:49 pm
Forum: Troubleshooting / Maintenance
Topic: barrel head
Replies: 4
Views: 3054

barrel head

I just received a .35 rem barrel and it does not have a head. I have another barrel assembly with a poor bore, can I take the head off this one and put it on the newly acquired barrel, lining up the index marks and check head space. do I need any special tools
by uhjohnson
Mon Nov 26, 2018 11:49 am
Forum: The Great Model 8
Topic: Restoring Great Grandfather’s Model 8
Replies: 33
Views: 731175

Re: Restoring Great Grandfather’s Model 8

I never was able to get that stubborn screw from the side of the reciever. At this point I’d want to get it out just to put a nicer looking replacement in place - but it’s just aesthetics I guess. [/quote] I always leave those two screws in place unless they are mauled up too much and have to replac...
by uhjohnson
Tue Nov 06, 2018 3:54 pm
Forum: Troubleshooting / Maintenance
Topic: Link tip
Replies: 1
Views: 1785

Link tip

I have the bolt out of an M8 and noticed the tip of the link is angled upward. Is the tip bent or is it suppose to be this way
by uhjohnson
Sat Oct 13, 2018 2:42 pm
Forum: Welcome Wagon
Topic: Rookie report part 3 continued
Replies: 9
Views: 11554

Re: Rookie report part 3 continued

The blade of a machinist's square works great with a 16 inch adjustable wrench. Be careful not to use too much force and loosen the pin in the barrel jacket/barrel jacket head that aligns them. As a matter of fact I would not loosen the BJ while it is still in the receiver of the gun. I have just lo...
by uhjohnson
Sun Sep 09, 2018 11:33 am
Forum: Troubleshooting / Maintenance
Topic: Help with barrel jacket bushing removal
Replies: 4
Views: 3297

Help with barrel jacket bushing removal

I have three barrel assemblies and I cannot get the bjb's off. I have the flip tool for both the barrel nut and bjb. I broke the bjb's side and had another made and will only use it on bushings that I have freed up.I have been soaking the bushings in kroll for months and have heated them to the poin...
by uhjohnson
Wed Feb 28, 2018 5:22 pm
Forum: Q & A about the 8/81
Topic: 30-30 Rem
Replies: 1
Views: 2250

30-30 Rem

What years were the M8 barrels marked 30-30 Rem before they were properly marked 30 Rem

Thanks
by uhjohnson
Mon Jan 15, 2018 10:31 am
Forum: Troubleshooting / Maintenance
Topic: FP retainer pin removal
Replies: 1
Views: 1990

Re: FP retainer pin removal

I figured it out, you have to be smarter than what your working with. I found the photos on the disassembly of the model 8 very helpful (https://www.flickr.com/photos/buster_charlie/sets/72157623271360342/page2) but i was a little confused when the author was showing the FP retainer pin being remove...
by uhjohnson
Sun Jan 14, 2018 7:22 pm
Forum: Troubleshooting / Maintenance
Topic: FP retainer pin removal
Replies: 1
Views: 1990

FP retainer pin removal

I have removed the bolt catch and two cam pins to free the bolt and spring tension from the firing pin but i cannot get the retainer pin out to remove the FP. I have applied penetrating fluid, cleaned the crud from the top of the pin and came in from the bottom opposite side diagonally with a small ...
by uhjohnson
Mon Dec 04, 2017 6:36 pm
Forum: The Great Model 8
Topic: 8D peerless not selling
Replies: 4
Views: 4527

Re: 8D peerless not selling

I added these screen shots to keep this thread more tangible once the auction is discarded by GB
1512432857689.jpeg
1512432857689.jpeg (266.34 KiB) Viewed 4419 times
1512432867468.jpeg
1512432867468.jpeg (234.46 KiB) Viewed 4419 times
by uhjohnson
Tue Nov 28, 2017 3:37 pm
Forum: The Great Model 8
Topic: 8D peerless not selling
Replies: 4
Views: 4527

8D peerless not selling

This is the second time on the block this month for this beaut, is there something wrong with it. To me it looks 100 percent original and is used but not abused and the price seems right

http://www.gunbroker.com/item/720714426
by uhjohnson
Thu Jul 06, 2017 3:26 am
Forum: For Sale or Trade
Topic: Remington 81 "Special Police" FOR SALE!!
Replies: 5
Views: 5196

Re: Remington 81 "Special Police" FOR SALE!!

Is it back on for 8,000 from the new owner http://www.gunbroker.com/item/662269518
by uhjohnson
Mon Apr 24, 2017 6:20 am
Forum: Other Remingtons'
Topic: Crazy price for a 14 1/2
Replies: 1
Views: 3652

Crazy price for a 14 1/2

Studio_20180407_133430-589x242.png
Studio_20180407_133430-589x242.png (118.61 KiB) Viewed 3210 times
I just had to have it and had the spare cash, she will join her .35 mod 14 sister, and .25-20 mod 25R carbine cousin :o

http://www.gunbroker.com/item/635146524
by uhjohnson
Mon Apr 24, 2017 5:35 am
Forum: The Great Model 8
Topic: Watson peep sight
Replies: 4
Views: 4116

Re: Watson peep sight

Nice looking sight, the right side cheek looks a little high and pronounced as if it has been glued on after a heavy sanding
by uhjohnson
Fri Jan 06, 2017 7:53 pm
Forum: For Sale or Trade
Topic: FN 1900
Replies: 16
Views: 10070

Re: FN 1900

Why would a gun sell for that high of a price if it is a custom not done by FN and is there any way to find out if in fact FN did not do the work
by uhjohnson
Thu Jan 05, 2017 9:03 pm
Forum: For Sale or Trade
Topic: FN 1900
Replies: 16
Views: 10070

Re: FN 1900

here is a permanent picture to follow this thread
by uhjohnson
Thu Jan 05, 2017 8:43 pm
Forum: For Sale or Trade
Topic: FN 1900
Replies: 16
Views: 10070

Re: FN 1900

Not knowing anything about the FN, is it all factory original and is it too much to pay for one, however jack1653 hung in until 5,000.00 so it must not be too high
by uhjohnson
Tue Jan 03, 2017 6:41 pm
Forum: Troubleshooting / Maintenance
Topic: Split washer in barrel assembly
Replies: 3
Views: 3834

Split washer in barrel assembly

I just disassembled my 30 rem barrel assembly to a recent purchase because the barrel appeared not to extend past the barrel nut enough and to make sure everything was there. Everything was there, well lubed, including a split washer that is not supposed to be there, I left it out upon reassembly. W...
by uhjohnson
Wed Jul 13, 2016 3:42 pm
Forum: For Sale or Trade
Topic: Another POE - Nassau County?
Replies: 12
Views: 8530

Another POE - Nassau County?

Why does the receiver police department lettering look so sloppy

http://www.gunbroker.com/item/570467006
by uhjohnson
Sat Jul 09, 2016 7:56 pm
Forum: The Great Model 8
Topic: Wood Spacer
Replies: 27
Views: 17110

Re: Wood Spacer

I can't believe I didn't pick up on that