Search found 255 matches

by kenhwind
Sun Aug 08, 2021 9:41 am
Forum: Q & A about the 8/81
Topic: Help with identification
Replies: 14
Views: 8095

Re: Help with identification

Nice Model 8-81
Yes $400 is a really good price imo, the tang sights sell on eBay for over $200 just about every time one is listed.
by kenhwind
Sat Jun 19, 2021 9:11 am
Forum: Q & A about the 8/81
Topic: Barrel swap question ????
Replies: 8
Views: 1465

Re: Barrel swap question ????

I used a .32 Remington barrel assembly in a Model 8 .30 Remington with no issues. Changing out the barrel assemblies at the range was more of a hassle then it was worth, then someone on eBay I was swapping messages with was in need of a .30 barrel assembly and I ended up selling him the .32. These a...
by kenhwind
Sat Jun 12, 2021 10:51 am
Forum: General
Topic: .25 Rem, Graf brass
Replies: 4
Views: 1416

Re: .25 Rem, Graf brass

When I got my .25 Model 8 I made sure components were available, and like wise used the Graf's brass. I know for a fact that I had loaded the cases up several times before I had issues, which was spilt cases at the shoulder. As for who makes Graf's brass it might be Quality Cartridge. http://www.qua...
by kenhwind
Mon May 31, 2021 4:00 pm
Forum: General
Topic: 32 Rem Ammo
Replies: 1
Views: 862

Re: 32 Rem Ammo

When I had my .32 Remington barrel assembly I made up some loads using the Graf's brass.
But when we bought our Model 14 the seller had some factory ammo, so we have some.
Fifty dollars is probably a good price.
by kenhwind
Tue May 25, 2021 9:57 am
Forum: General
Topic: .32 Rem brass at Grafs HEADS UP!
Replies: 12
Views: 3070

Re: .32 Rem brass at Grafs HEADS UP!

I've had good results using the Graf's brass in .25, .30 as well as .32 Remington Yes the case necks split but this didn't seem to happen until I had loaded the cases several times. These were the .25 caliber. The Model 8 seems to have a chamber on the max specifications. The .32 brass didn't get lo...
by kenhwind
Sun May 23, 2021 9:20 pm
Forum: The Great Model 8
Topic: Wood Spacer
Replies: 27
Views: 16958

Re: Wood Spacer

Okay just followed up on the link to this thread and we can add one more Model 8 25-35 Remington with a wood spacer.
I did check Gun Parts Corp and see that they list a buffer spring.

I looked at my pictures and have one of the split washer but not the wooden spacer.
by kenhwind
Sun May 23, 2021 9:06 pm
Forum: Troubleshooting / Maintenance
Topic: Barrel sticking to the rear after firing (SOLVED !)
Replies: 16
Views: 3135

Re: Barrel sticking to the rear after firing

My 25-35 Model 8 has the wood plug no buffer spring and works just fine.
I'm not convinced that the 25 Rem Model 8 had a buffer spring.
by kenhwind
Sat Jan 23, 2021 12:45 pm
Forum: General
Topic: Remington's Models 14 and 141
Replies: 8
Views: 2796

Re: Remington's Models 14 and 141

We have a Model 14 in .32 Remington. We had been looking and maybe considering getting one, as most of us here, we have several Model 8s and an 81, but have had a couple of other 81 Remington's. Ours was posted on my gun club's web site so it was no big deal to meet there to have a look see. My brot...
by kenhwind
Tue Dec 29, 2020 2:20 pm
Forum: Wanted to buy
Topic: Model 8 in 25 Rem
Replies: 3
Views: 1564

Re: Model 8 in 25 Rem

How much do you want to spend?
I might consider selling my Model 8 .25-35 rem.
by kenhwind
Sun Dec 20, 2020 10:16 pm
Forum: Wanted to buy
Topic: ISO: Rear Sight threaded block/Williams Mount
Replies: 4
Views: 1668

Re: ISO: Rear Sight threaded block/Williams Mount

Hey you're in luck. Went to check pricing and found this:
https://www.gunpartscorp.com/products/1759330
by kenhwind
Sun Dec 20, 2020 12:01 pm
Forum: Wanted to buy
Topic: ISO: Rear Sight threaded block/Williams Mount
Replies: 4
Views: 1668

Re: ISO: Rear Sight threaded block/Williams Mount

Is this what you are ISO:
Image
by kenhwind
Tue Oct 20, 2020 10:54 am
Forum: General
Topic: Everyone out to pasture?
Replies: 22
Views: 6002

Re: Everyone out to pasture?

I check in periodically to check on current posts. This isn't the only forum that is slow I think that once you're caught up on all of the threads and comments its not too hard to keep up to date. My brother and I have a Model 8 C .35 that was Dad's so we grew up with one of these rifles. We went to...
by kenhwind
Sun Sep 20, 2020 9:48 am
Forum: Q & A about the 8/81
Topic: Current 8 & 81 Prices
Replies: 7
Views: 2874

Current 8 & 81 Prices

Are Model 8 & 81 Remington's actually selling for the prices I see on the internet, GunBroker in particular?
by kenhwind
Sat Aug 22, 2020 10:19 am
Forum: For Sale or Trade
Topic: newly mfg barrel nuts and washers
Replies: 30
Views: 8392

Re: newly mfg barrel nuts and washers

How many so far?
If it will help others out I'll buy one too.
by kenhwind
Mon May 04, 2020 8:46 am
Forum: The Great Model 8
Topic: Model 8 C
Replies: 0
Views: 3478

Model 8 C

Just curious if anyone here win the Lock Stock and Barrel Remington Model 8C auction on GunBroker?
by kenhwind
Thu Apr 30, 2020 4:21 pm
Forum: Q & A about the 8/81
Topic: .32 reload questions
Replies: 7
Views: 3435

Re: .32 reload questions

I started loading using a CH Press my parents had bought for me. My brother had a Lyman Spartan press. He decided we needed a Dillon which was new at the time and we ended up with a used press. He moved up to Saint Augustine and I was still in Ft Lauderdale, FL. I then bought a hardly used Lyman Spa...
by kenhwind
Thu Apr 30, 2020 1:02 pm
Forum: Q & A about the 8/81
Topic: .32 reload questions
Replies: 7
Views: 3435

Re: .32 reload questions

The Lyman "M" die doesn't actually flare the case mouth it has a step in it and expands the very top of the case. Redding sells a spacer kit. Seat the bullet with the spacer then remove the spacer and crimp, but you will have to unscrew the seating die. Yes unless you're taper crimping it is best to...
by kenhwind
Wed Apr 29, 2020 9:46 pm
Forum: Q & A about the 8/81
Topic: .32 reload questions
Replies: 7
Views: 3435

Re: .32 reload questions

Redding dies, good for you, that's what I have. I don't load rifle ammo on the Dillon, the Dillon powder measure doesn't like extruded powder, well no powder measure does. I use a Redding T-7 Turret press, previously used an older Lyman Spar T. Lyman makes an "M" die that makes a three die set and i...
by kenhwind
Wed Apr 29, 2020 7:55 am
Forum: General
Topic: scope mount identification
Replies: 3
Views: 3643

Re: scope mount identification

Do I see three extra holes in the side of the receiver?
by kenhwind
Wed Apr 29, 2020 7:53 am
Forum: Q & A about the 8/81
Topic: .32 reload questions
Replies: 7
Views: 3435

Re: .32 reload questions

Loading the .32 Remington shouldn't present any problems. I had a .32 barrel assembly and loaded some up, but have parted with the barrel assembly. I crimp by feel. you should be able to visually see how much crimp you have. You cannot over crimp because it will push the shoulder back. Loading for a...
by kenhwind
Mon Apr 27, 2020 1:44 pm
Forum: Q & A about the 8/81
Topic: Ejection issues
Replies: 11
Views: 5205

Re: Ejection issues

Considering that old gun cleaning solvent dries up like shellac, and gun oil turns into gum oil, its a good idea to take apart these old Remington's and clean them. I've taken all of ours apart as well as two others we do not have anymore. Some really needed it and some not so much, but considering ...
by kenhwind
Sun Apr 19, 2020 7:30 am
Forum: Q & A about the 8/81
Topic: Are my handloads safe
Replies: 4
Views: 2508

Re: Are my handloads safe

I just checked my manuals: The Lyman data lists a Remington case, Remington primer; Sierra 200 grain, H4895 - 38.5 (max) Hornady lists a Remington case, Federal primer; Hornady 200 grain; H4895 - 36.0 Both loads are listed @ about 2,000 fps. You are, like us, shooting a very old rifle, my advice wou...
by kenhwind
Tue Apr 14, 2020 9:00 am
Forum: Q & A about the 8/81
Topic: Model 8 peep sight questions
Replies: 5
Views: 2897

Re: Model 8 peep sight questions

Lyman and Marbles made a tang sight that used the existing hole where the tang becomes the receiver. Redfield made a more correctly named receiver sight which required a second hole be drilled and tapped like the OP's gun. Williams also made a receiver sight, more then likely after WWII. This sight ...
by kenhwind
Sat Apr 04, 2020 9:49 am
Forum: Q & A about the 8/81
Topic: Model 8 peep sight questions
Replies: 5
Views: 2897

Re: Model 8 peep sight questions

Yes looks like for the Redfield.
No body is giving them away.
by kenhwind
Sun Mar 22, 2020 4:44 pm
Forum: Q & A about the 8/81
Topic: Bolt will not retract
Replies: 3
Views: 2924

Re: Bolt will not retract

with the safety down you should be able to see the hammer if it is not cocked. And if it is in the fired position then the riffle cannot go off as you do not know if its loaded.
The safety level isn't loose is it?
by kenhwind
Sun Mar 22, 2020 10:02 am
Forum: Q & A about the 8/81
Topic: Bolt will not retract
Replies: 3
Views: 2924

Re: Bolt will not retract

If this "E" Grade is in good condition I think that the bolt is glued in place from dried up solvent, which turns into something similar to dried shellac. The only thin locking the bolt is the safety/rocker and if that moves the bolt should retract. I'd take the barrel assembly off and spray some Gu...
by kenhwind
Sat Feb 15, 2020 11:44 am
Forum: Troubleshooting / Maintenance
Topic: stuck cam pin
Replies: 3
Views: 2287

Re: stuck cam pin

What I'd probably do is try a little heat with a butane lighter. Soaking it is also a good idea.
Old bore cleaner dried up hard like shellac, and you're right most of these rifles have never been disassembled.
You should already have or you can remove the firing pin.
by kenhwind
Fri Feb 07, 2020 1:30 pm
Forum: The Great Model 8
Topic: Refinish?
Replies: 5
Views: 5190

Re: Refinish?

Macon Gunstocks: https://www.shop.macongunstocks.com/Remington-Model-8-Remington-Model-81_c115.htm I'm not into refinishing, and not so much about diminishing value as that I'd have no idea what to expect, and the cost of shipping plus the work kind of makes it prohibitive imo. Years ago it was a mo...
by kenhwind
Sun Feb 02, 2020 9:35 am
Forum: For Sale or Trade
Topic: New Rem Model 8/81 barrel tool for sale (Second batch is ready for sale)
Replies: 24
Views: 12111

Re: New Rem Model 8 barrel tool for sale

I bought the tool I use, which is similar to this one, on eBay. Might be a place to go. I would try an eBay listing eBay has a lot of traffic compared to one forum. Once these Model 8 and 81 Rifles have been disassembled and thoroughly cleaned there's really no reason to take the barrel assembled b...
by kenhwind
Sun Feb 02, 2020 9:25 am
Forum: The Great Model 81 'Woodsmaster'
Topic: my little 25-35
Replies: 6
Views: 3574

Re: my little 25-35

How is the bore on your 25-35? I have one too, mine was well used metal was good, wood ahh so-so. What prompted me to get a 25 was that I had bought a .32 Remington barrel assembly off of eBay and I thought I'd get a .30, but then considering the 30 and 32 are almost the same, I decided to find a 25...
by kenhwind
Thu Jan 30, 2020 11:30 pm
Forum: The Great Model 8
Topic: is this checkering correct?
Replies: 8
Views: 8269

Re: is this checkering correct?

I'm pretty sure ours, my brother and I as this was Dad's, is correct as the stock is marked inside as an 8 C which was a higher grade of wood and checkered, probably a standard pattern. I doubt if Remington would have checkered up to the takedown swivel screw.
by kenhwind
Thu Jan 30, 2020 5:01 pm
Forum: The Great Model 8
Topic: is this checkering correct?
Replies: 8
Views: 8269

Re: is this checkering correct?

Here's out 8 C forearm:

Image

Image
by kenhwind
Tue Jan 28, 2020 9:23 am
Forum: Q & A about the 8/81
Topic: To disassemble or not?
Replies: 13
Views: 5420

Re: To disassemble or not?

I've repaired a loose barrel jacket a couple of times. What I did was get the original pin out, unscrew the barrel jacket from the receiver extension, clean, use numbered drill bits and just go up slightly in pin size.. When reassembling thread the two parts together drill a new hole. Unscrew them s...
by kenhwind
Tue Jan 28, 2020 9:05 am
Forum: Troubleshooting / Maintenance
Topic: HELP Side Scope Mounting Plate Broke Off
Replies: 3
Views: 2655

Re: HELP Side Scope Mounting Plate Broke Off

If the screws are 6-48 Brownell's sells an oversized tap and screws.
by kenhwind
Sun Jan 12, 2020 12:26 pm
Forum: Q & A about the 8/81
Topic: To disassemble or not?
Replies: 13
Views: 5420

Re: To disassemble or not?

We have taken all of the 8 & 81 Remington's we have completely apart. While the videos may be good I'd advise to get the NRA Assembly/Disassembly Book as well as the Gun Digest some good tips in both. If you can get the barrel nut off and remove the barrel the jacket inside can be cleaned sufficient...
by kenhwind
Sat Dec 07, 2019 10:52 am
Forum: Wanted to buy
Topic: RCBS 25 Remington Dies
Replies: 2
Views: 2528

Re: RCBS 25 Remington Dies

Go to Huntington RCBS
https://www.huntingtons.com/store/produ ... 906&page=1

Redding dies are half that price.
by kenhwind
Sat Dec 07, 2019 10:39 am
Forum: Q & A about the 8/81
Topic: Ejection issues
Replies: 11
Views: 5205

Re: Ejection issues

There is one issue that makes these guns erratic. Open the bolt and look inside, if you see the magazine indicator spring on top of the bolt guides that's the problem.
When reassembling these gun that spring fits into a small slot and has a tendency to slip out when assembling.
by kenhwind
Sun Sep 29, 2019 10:29 am
Forum: Q & A about the 8/81
Topic: New .30 Rem brass splitting necks !?
Replies: 13
Views: 8887

Re: New .30 Rem brass splitting necks !?

I think that someone at Graf's is mistaken. Jamison doesn't list 30 Remington on their site, but Quality cartridge does, and their home page states that their properly headstamped brass is available from Graf & Sons. I was just going through my Graf's .25 Remington brass and noticed that the brass h...
by kenhwind
Fri Sep 27, 2019 8:55 am
Forum: Q & A about the 8/81
Topic: Thread pitch on M81 rear sight screws?
Replies: 17
Views: 11151

Re: Thread pitch on M81 rear sight screws?

You could make a Scout type rifle with these. If you took and extra rear sight attaching plate and mounted it in front of the rear sight it might be possible to mount a scope in front of the receiver Scout Rifle or Shotgun style.
by kenhwind
Fri Sep 27, 2019 8:45 am
Forum: The Great Model 8
Topic: Peerless Grade Model 8 for sale
Replies: 7
Views: 4625

Re: Peerless Grade Model 8 for sale

A "D" Grade? We have a "C" Grade Model 8 and the only distinguishing thing about it is the higher grade wood and checkering. The stock is marked "C" inside, so I'm pretty sure its legit. Would a "D" Grade have the level of engraving? My first impression is that it is not factory, but I am not qualif...
by kenhwind
Wed Sep 25, 2019 1:53 pm
Forum: Troubleshooting / Maintenance
Topic: Shooting Vintage Ammo
Replies: 6
Views: 3782

Re: Shooting Vintage Ammo

Oh I make my own too.
We won't be shooting too much of this vintage stuff, my post was to give a heads up on shooting this older ammo.
by kenhwind
Mon Sep 23, 2019 10:36 pm
Forum: Troubleshooting / Maintenance
Topic: Shooting Vintage Ammo
Replies: 6
Views: 3782

Re: Shooting Vintage Ammo

I buffed the powder off of them. I shot several of the .25's no problem.
We will not shoot anymore of the 30's in the one box, but have others to try out.
by kenhwind
Mon Sep 23, 2019 11:37 am
Forum: Troubleshooting / Maintenance
Topic: Shooting Vintage Ammo
Replies: 6
Views: 3782

Re: Shooting Vintage Ammo

I also shot the .25 Remington and have a split case as well as one misfire, well two because one of these misfired before. The misfires were from an old box of Western. The split case is from a red box of Winchesters. I shot a few of these only one seemed to split. https://i.imgur.com/oS1qdpA.jpg ht...
by kenhwind
Mon Sep 23, 2019 11:32 am
Forum: Troubleshooting / Maintenance
Topic: Shooting Vintage Ammo
Replies: 6
Views: 3782

Re: Shooting Vintage Ammo

We also shot these Remington 30 Remington, not a full box either about 14 rounds. Two split case necks. Now I've seen this on occasion over the years, and not always with older ammo.

Image Image
by kenhwind
Mon Sep 23, 2019 11:21 am
Forum: Troubleshooting / Maintenance
Topic: Shooting Vintage Ammo
Replies: 6
Views: 3782

Shooting Vintage Ammo

Went shooting yesterday and we had a box of Western 30 Remington that wasn't full and decided to shoot some. Cases all cracked. Some where shot in one Model 8, the others in the other one. This ammo isn't that old. These were Silvertips, but I had some other loose 30 Remington's also Silvertips that...
by kenhwind
Sun Sep 22, 2019 4:46 pm
Forum: The Great Model 8
Topic: 32 Remington load data
Replies: 6
Views: 4041

Re: 32 Remington load data

I had a .32 barrel assembly and made up a few loads, but I'm not sure if I recorded them. No I didn't, but do have a load listed for the .32 Special 28.0 Reloader 7.

My 45th Lyman Manual lists in the reference section 32 Remington 170 Grain Jacketed: IMR 4064 28.0-32.0
by kenhwind
Sun Sep 22, 2019 4:30 pm
Forum: Q & A about the 8/81
Topic: Thread pitch on M81 rear sight screws?
Replies: 17
Views: 11151

Re: Thread pitch on M81 rear sight screws?

Back when these rifles were made, at least the Model 8 the gun companies made what they calculated to be correct for the purpose, not like today or say since WWII where most threads are a standardized pitch and dia. So maybe these screws may very well be slightly larger then #6 or actually a fractio...
by kenhwind
Fri Sep 20, 2019 3:59 pm
Forum: The Great Model 81 'Woodsmaster'
Topic: Good one Got away
Replies: 4
Views: 4016

Re: Good one Got away

Didn't see that one. It would be nice to have, looked like it was in good condition.
by kenhwind
Fri Sep 20, 2019 3:56 pm
Forum: Troubleshooting / Maintenance
Topic: Mod 8 .30 Rem: Hard to insert rounds in magazine
Replies: 3
Views: 2626

Re: Mod 8 .30 Rem: Hard to insert rounds in magazine

See if the top of the magazine has been squished in any, otherwise I don't know. I don't think I'd mess with the side spring any.